N-Com B4 User Instructions - page 11
B4
11
A special acoustic beep signals the change from one function to another.
When B4
B4
B4
B4 is turned on, the menu is always in the “BASE” mode. Depending on the menu
position, you can manage the various audio devices and the available functions:
Menu
Functions
Base
•
Management of an external source connected via cable
•
Use of Mobile phone/GPS with Bluetooth connection
•
Use of the intercom “Rider–Pillion Passenger”
•
Listening to and management of Bluetooth A2DP player
Radio
•
Listening to and management of FM Radio
•
Use of Mobile phone/GPS with Bluetooth connection
•
Use of the intercom “Rider–Pillion Passenger”
Bike to Bike
•
Use of the intercom “Bike to Bike”
Functions concerning Bluetooth mobile phone management are available in all menu positions.
Note: The “Bike-to-Bike” menu must be specifically activated from the system (see chapter
13) or by using the N-Com Wizard programme.
5.
N-COM WIZARD
“N-Com Wizard” is the PC application that can be used to manage and configure
the B4
B4
B4
B4 system.
The programme can be downloaded from the Internet site www.n-com.it, in the “Download”
section. In order to use it, a helmet equipped with B4
B4
B4
B4 must be connected to the PC, using the
USB cable supplied with the system.
N-Com Wizard allows you to customize your B4
B4
B4
B4, specifically:
•
Setting the system audio levels
•
Pre-set and manage your favourite radio stations
•
Update the device firmware
•
Turn on or off the Bike-to-Bike menu
•
Manage connections with other bikes
The programme includes an on-line guide that explains how it works (after installing it on your
PC, press F1 to display this guide).
6.
PAIRING UP BLUETOOTH DEVICES
In order for the B4
B4
B4
B4 system to be connected to another Bluetooth device, the latter needs to
be first paired up with the N-Com system.
The pairing up procedure is the same for all Bluetooth devices: mobile phones, MP3 Bluetooth
players, satellite navigators, etc.
1.
Make sure the B4
B4
B4
B4 is turned off;
2.
Press “on” and keep it pressed (for more than 4 seconds), until the LEDs start to flash
quickly and you hear a sharp beep in the headset, indicating the “Pair-up mode”;
3.
On the Bluetooth device, turn on the search for Bluetooth devices (refer to the
instructions manual of your device for the proper pairing up procedure, as it varies
depending on the brand and model of the device);
4.
After a few seconds, the mobile phone will display the name “N-Com Bt4 v.X.XX”,
followed by the manufacturer’s identification data;
5.
Select the N-Com device. If a password is requested, enter 0000 (four zeros);
6.
B4
B4
B4
B4 will confirm the pairing up by means of a tone in the headset, and the LEDs will
stop flashing;
7.
Turn off and on both the mobile phone and the B4
B4
B4
B4 to store the pairing up data.
Note: The affiliation is stored in the helmet and in the cell phone and it is not lost when the
two devices are turned off. As a result it needs to be carried out only once.