N-Com B4 User Instructions - page 13
B4
13
GPS Conference Call Function
The Conference function allows you to keep the “Rider-Pillion Passenger” intercom open even
while the satellite navigator is giving instructions, thus preventing the intercom mode to be
turned off every time the navigator gives instructions.
Caution: this function is available only if the Passenger helmet is also equipped with
Bluetooth Kit3, B4
B4
B4
B4 or next versions.
At the end of the GPS communication, the intercom with the second helmet stays open and
the "Conference" setting is stored for future GPS communications.
9.
STEREO FM RADIO
B4
B4
B4
B4 is equipped with Stereo FM radio with RDS (Radio Data System) technology, which
automatically selects the strongest signal available for the FM radio you want to listen to,
regardless of your location.
You can scroll through the band of frequencies using the automatic search function, pre-set up
to 6 favourite radio stations and change stations among the pre-set ones.
Turning on the radio
The radio turns on automatically by selecting the “Radio”
menu (scroll through the menu by pressing “on” for 2
seconds).
Turning off the radio
The radio turns off when you change the menu item (scroll
through the menu by pressing “on” for 2 seconds)
New station automatic
search
Press “” and keep it pressed for 2 seconds
Pre-setting a radio station
Press “” and keep it pressed for 4 seconds.
This function can also be turned on through PC
using the “N-Com Wizard” programme.
Changing radio stations
(among the pre-set ones)
Press “” and keep it pressed for 2 seconds
10.
BLUETOOTH A2DP MUSIC PLAYER
You can listen to high quality music by connecting B4
B4
B4
B4 to a device equipped with Bluetooth
A2DP (Advanced Audio Distribution Profile) protocol.
The B4
B4
B4
B4 system is also equipped with Bluetooth AVRCP (Audio Video Remote Control Profile)
protocol, which allows you to stop and resume music reproduction directly from the helmet
(with devices equipped with AVRCP).
Connection to A2DP music
player
Go to the “BASE” menu. Press “” for 2 seconds. Wait a few
seconds for the connection.
Play music (Play)
Press the “” button and keep it pressed for 2 seconds.
Pause function (Pause)
When the player is connected and playing music, press “”
for 2 seconds.
Next track (Skip)
When the player is playing music, press “” for 4 about
seconds.
Stop playing music (Stop)
Press “” for 2 seconds. The music stops and the A2DP
player is disconnected.
By moving to another function with the menu key, the system automatically disconnects the
A2DP device.
Note: The Bluetooth intercom does not work while listening to an A2DP audio source.