N-Tron 608MFX-ST Network Configuration Manual - page 16
16
Table 3–6, Settings in the Switch Menu - Continued
aging
Enable | Disable aging.
Administrator only
When aging is activated, a
land address is
automatically deleted in the
FDB table of the 608MFX
if no packet is received
from the station with the
relevant MAC address
within the aging time.
agetime
Setting for the aging time in
seconds.
The default is 40 seconds.
Administrator only
fdbpoll
Sets the interval at which the copy
of the filtering database kept
internally on the 608MFX is
updated.
Administrator only
For service purposes only
mirror
Enable | Disable mirroring.
Administrator only
Mirroring allows the data
exchange at one 608MFX
port (mirrored port) to be
mirrored to another port
(monitor port) where it can
be recorded with a protocol
analyzer.
m_ports
Selects ports for mirroring
src – (mirrored) port, i.e. the port
whose data exchange will be
recorded.
(The default is 2)
dest – (monitor) port, i.e. the port
to which the protocol analyzer is
connected.
(The default is 1)
Administrator only
baud <9600 |
19200 | 38400 |
115200>
Sets the transmission rate of the
serial port. The default is 115200.
Administrator only