NAD C356BEE Owner's Manual - page 16
PHONO SECTION (WITH OPTIONAL PP 375 INSTALLED)
MM/MC IN, PRE OUT
Input impedance - MC
100 ohms (R)
180 pF (C)
MM
47 kohms (R)
180 pF (C)
Input sensitivity
2
for 80 W in 8 ohms - MC
0.38 mV 1 kHz
MM
5.0 mV 1 kHz
Input sensitivity
2
for 1 W in 8 ohms - MC
39 uV 1 kHz
MM
0.56 mV 1 kHz
Input overload - MC
0.6 mV/5.9 mV/58 mV (20 Hz/1 kHz/20 kHz)
MM
9.3 mV/85 mV/850 mV (20 Hz/1 kHz/20 kHz)
Gain - MC in - TAPE OUT
3
57.0 dB (at 1 kHz, 10 kohms load)
MM in - TAPE OUT
34.2 dB (at 1 kHz, 10 kohms load)
THD1 (CCIF IMD, DIM 100)
<0.009 % (20 Hz – 20 kHz, 4 Vrms TAPE OUT)
Signal-to-Noise Ratio, IHF A-weighted - MC
4
>78 dB (ref. 0.5 mV input, 10 ohms source)
MM
5
>75 dB (ref. 5 mV input, IHF cartridge source)
RIAA response accuracy
±0.5 dB (20 Hz – 50 Hz)
±0.3 dB (50 Hz – 20 kHz)
Infrasonic filter
-3 dB at 10 Hz
-14 dB at 4 Hz
Channel Separation - MC
>60 dB (1 kHz and 10 kHz)
MM
>60 dB (1 kHz and 10 kHz)
OVERALL SPECIFICATIONS
LINE LEVEL INPUT, SPEAKER OUT
Continuous output power into 8 ohms and 4 ohms (Stereo)
>80 W (at rated THD, 20 Hz-20 kHz, both channels driven)
THD
1
20 Hz – 20 kHz, CCIF IMD, SMPTE IMD, DIM 100
<0.009 % (250 mW to 80 W, 8 ohms and 4 ohms)
Signal-to-Noise Ratio
>92 dB (IHF; A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
>110 dB (IHF; A-weighted, ref. 80 W in 8 ohms, maximum volume)
Frequency response
±0.3 dB (20 Hz - 20 kHz, Tone Defeat ON)
10 Hz – 65 kHz (-3 dB)
Channel separation - 1 kHz
>80 dB
10 kHz
>68 dB
POWER CONSUMPTION
Rated power
350 W (at 230 V AC 50 Hz; 120V AC 60 Hz)
Standby power
<0.5 W
Idle power
<40 W
DIMENSION AND WEIGHT
Unit Dimensions (W x H x D) Gross
6
435 x 131 x 337 mm
17 ¹/₈ x 5 ³/₁₆ x 13 ⁵/₁₆ inches
Net weight
8.7 kg (19.2 lbs)
Shipping weight
10.6 kg (23.4 lbs)
LEGEND:
1 THD is the sum of all the harmonic components within the 80 kHz measurement bandwidth and does not include noise.
2 Measured from Speaker Out.
3 Measured with 10 ohms generator impedance.
4 Measured with 10 ohms input termination.
5 Measured with MM cartridge connected (600 mH + 600 ohms).
6 Gross dimensions include feet, volume knob and tightened speaker terminals.
Specifications are subject to change without notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest
information about C 356BEE.
REFERENCE
SPECIFICATIONS
16
ENGLISH
POR
TUGUÊS
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ