- DL manuals
- NAD
- Receiver
- C717
- Owner's Manual
NAD C717 Owner's Manual
Summary of C717
Page 1
En g li sh fr anÇ ais esp aÑol it aliano deut sch nederl ands svensk a РУ ССКИЙ ® owner’s manual c 717 dvd receiver.
Page 2
Save these instructions for later use. Follow all warnings and instructions marked on the audio equipment. 1 read instructions - all the safety and operating instructions should be read before the product is operated. 2 retain instructions - the safety and operating instructions should be retained f...
Page 3
19 damage requiring service - unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) when the power-supply cord or plug is damaged. B) if liquid has been spilled, or objects have fallen into the product. C) if the product has be...
Page 4
Important information for uk customers donot cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. If, noneth...
Page 5
Introduction table of contents thank you for choosing nad the c 717 dvd receiver is a technologically advanced and highly capable product - yet we have invested great effort in making it simple and easy to use. The c 717 delivers a range of genuinely useful options for stereo listening using powerfu...
Page 6
Introduction getting started unpacking and setup what’s in the box packed with your c 717 you will find: • an am loop antenna • an fm lead-type antenna • the sr 9 remote control with 2 (two) aaa batteries • this owner’s manual save the packaging please save the box and all of the packaging in which ...
Page 7
1 phones: accepts stereo headphone using a standard 1/8-inch stereo phone plug. Plugging in your headphone automatically mutes output from the speakers and subwoofer output (but not from the vcr out jacks of the vcr). The vfd will show “h/p on” when you headphone is plugged in to this jack and “h/p ...
Page 8
10 tone/balance: toggle this button to adjust bass, treble and balance center settings in combination with [scroll/push/enter] knob. Refer also to the item about adjusting tone and balance controls under the setting up the c 717 section of the setup page. 11 tuner mode: in am or fm mode and in combi...
Page 9
1 ac power cord: plug the ac power cord into a live ac wall socket. Make sure all connections have been made before connecting to mains. Connect only to the prescribed ac outlet, i.E., 120v 60 hz or 230v 50 hz. 2 subw (subwoofer) out: connect this output to a powered (“active”) subwoofer or to a pow...
Page 10
9 tv: input for additional line level input signals such as tv, mini disc player or the output signal from a step-up amplifier for a turntable. Use a twin rca-to-rca lead to connect the auxiliary unit’s left and right “audio outputs” to this input. Note tvinputportisforaudiosignalonly. 10 fm, am ant...
Page 11
1 on: switch c 717 on. 2 off: switch c 717 off. 3 device selector: directly select a source device – dvd, tuner, tv or vcr. 4 sleep: set sleep mode timer. Dimmer: reduce or restore vfd brightness. Late night: make soft sounds comparatively louder while limiting peak loudness of loud ones. 5 numeric ...
Page 12
About the on-screen display (osd) the c 717 employs a self-explanatory on-screen display “menu” that will appear on the connected video monitor/tv. These are required during the setup process (and are useful in day-to-day operation), so be sure to connect the monitor/tv before proceeding with setup....
Page 13
Adjusting tone and balance controls toggle the [tone/balance] button to step through the following modes - “bass”, “treble” or “balance center”. Select the feature you want to adjust and within 3 seconds, turn [scroll/push/enter] clockwise or counterclockwise to change the level settings. Bass and t...
Page 14
You may operate the c 717 dvd receiver from its front panel or via the sr 9 remote control. Since the remote will be the primary controller for most cases, we will focus on remote-controlled operations. Be sure also to read the section, “identification of controls - front panel”. Region management i...
Page 15
Language select a language for the setup menu and on-screen display. The following are the available languages – english, french, german, dutch, spanish, italian, russian and swedish. Subtitle depending on the dvd media, only those subtitle languages recorded on the dvd media are available. When a l...
Page 16
P-scan if your television is a high-definition or “digital ready” television, you may take advantage of the c 717’s progressive scan output for the highest video resolution possible. To activate progressive scan, set first “video out” (see “video out” section below) to “component.” then, select “on”...
Page 17
Depending on the media, the following are other basic features of the c 717’s internal dvd player. Included also below are some sr 9 buttons that have no corresponding buttons in the front panel. Make sure that you select “dvd” at the device selector selection of the sr 9 before you proceed with the...
Page 18
Late night night listening mode allows one the option to make soft sounds comparatively louder while limiting the peak loudness of loud ones. It is useful when you watch your favorite action movie without disturbing others at night. Toggle [late night] to switch between “night on” and “night off” mo...
Page 19
Activate timer operation when pressed, the [timer] button in the sr 9 remote control will activate several timer modes. Toggle [timer] to step through the following modes: time timer sleep refer to the vfd, when setting up time, timer and sleep modes. Setting the clock 1 toggle [timer] to step throu...
Page 20
The c 717’s internal am/fm tuner offers very high quality sound from radio broadcasts. The reception and sound quality will always be dependent to a degree however on the type of antenna(s) used as well as proximity to the broadcast origin, geography and weather conditions. Selecting am/fm press [so...
Page 21
Rds operation radio data system (rds) transmits station call signs or network information, station program type, text messages about the station or specifics of a musical selection and the time. Not every fm station incorporates rds in its broadcast signal. In most areas you will find from one to se...
Page 22
Condition possible causes possible solutions nosound. Ac power unplugged. • check ac cable connection and outlet. • power not switched on. • outlet has no power. • nosoundforonechannel. Faulty/missing cables. • check cables. • “left” or “right” channel at balance adjust set to balance l +6” or “bala...
Page 23
Amplifer section continuous output power into 6 Ω 20 w ihf dynamic power, 6 Ω 30 w tone controls : treble ±10 db bass ±10 db damping factor > 30 input impedance (r & c) 47 kΩ input sensitivity 300 mv voltage gain 33 db frequency response ± 3 db (ref. 10 hz to 20 khz) signal/noise ratio, a-weighted 9...
Page 24
Dvd/cd section system signal system pal/ntsc/auto laser two wavelength laser diode cd wavelength 790nm dvd wavelength 650nm frequency response : cd ± 3 db (ref. 10 hz to 20 khz) dvd ± 3 db (ref. 10 hz to 20 khz) signal/noise ratio (audio) : cd 95 db dvd 95 db signal/noise ratio (video) 65 db dynamic...
Page 25
En g li sh fr anÇ ais esp aÑol it aliano deut sch nederl ands svensk a РУ ССКИЙ.
Page 26
Www .Nadelectronics .Com ©2008 nad electronics international a division of lenbrook industries limited all rights reserved. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of nad electronics international c 717 owner’s manual issue 1-09...