NAD T535 Owner's Manual - page 15
SPEAKER SETUP MENU
SIZE
Select a speaker that you want to adjust. Press
to set a mode (Large,
Small or Off).
large : If you have connected the system to a speaker with a low
frequency of 100Hz or below, select [Large]. If you have not connected
a subwoofer, always select [Large] for Front speaker (L/R).
Small : If you have connected the system to a speaker without a low
frequency of 100Hz or below, select [Small].
off : When you do not have a certain speaker connected, select [Off].
NOTES
• [FrontL/R]speaker’ssizecanbesetto[Large]or[Small]only.
• IfFrontL/Rspeaker’ssizeissetto[Small],RearandSurroundspeaker’s
sizecanonlybesetto[Small]or[Off].
• Subwoofer’ssizecanbesetonlyto[On]or[Off].
• ThesesettingsarenotavailableforSACDdiscs.
• [Center],[SurroundL/R]and[Subwoofer]settingsarenotavailable
whenthe[AnalogOutput]settingissetto[Stereo](seealsothesection
“AnalogOutput”).
reSet
The Speaker Size settings can be reset to their initial factory settings by
selecting [On] at the [Reset] option.
When [On] is selected, the confirmation screen appears.
Select [Yes] to reset the setting, and then press ENTER. The [Size] settings
are now reset to their initial factory settings.
Select [Off] for the settings to remain unchanged.
DISTANCE
Setting the Distance lets the speakers know how far the sound has to travel
to reach your set listening point. This allows the sound from each speaker to
reach the listener at the same time.
Press
to adjust the Distance of the selected speaker. [0.3m (1 ft)
– 12.0m (40 ft)]
Distance can be displayed as [Feet] or [Meter] selectable at the [Unit] item.
NOTES
• [Center]distancesettingcannotbespecifiedbeyondorbelow5ft(1.5m)
ofthe[FrontL/R]setting.
• [SurroundL/R]distancesettingcannotbespecifiedbeyondorbelow15ft
(4.5m)ofthe[FrontL/R]setting.
reSet
The Speaker Distance settings can be reset to their initial factory settings by
selecting [On] at the [Reset] option.
When [On] is selected, the confirmation screen appears.
Select [Yes] to reset the setting, and then press ENTER. The [Distance]
settings are now reset to their initial factory settings.
Select [Off] for the settings to remain unchanged.
OPERATION
uSing the t 535 – Speaker Setup menu
15
EN
G
LI
SH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
T535_eng_OM_v07.indd 15
16/7/07 08:12:23