NAD T535 Owner's Manual - page 6
INTRODUCTION
getting the moSt from the t 535
UNPACKING AND SETUP
what’S in the box
Packed with your T 535 you will find:
• An audio/video cable connector
• The DVD 9 remote control with 2 (two) AAA batteries
• This owner’s manual
Save the packaging
Please save the box and all of the packaging in which your T 535 arrived.
Should you move or otherwise need to transport your T 535, this is by far
the safest container in which to do so. We’ve seen too many otherwise
perfect components damaged in transit for lack of a proper shipping
carton, so please: Save that box!
chooSing a location
Choose a location that is well ventilated (with at least several inches to both
sides and behind), and that will provide a clear line of sight, within 25 feet/8
meters, between the T 535’s front panel and your primary listening/viewing
position. This will ensure reliable infrared remote control communications.
The T 535 generates a modest amount of heat, but nothing that should
trouble adjacent components. It is perfectly possible to stack the T 535 on
top of other components.
QUICK START
In case you simply cannot wait to experience the performance of your new
NAD T 535, we provide the following “Quick Start” instructions to get you
underway.
Please make all the connections to your T 535 with the unit unplugged. It is
also advisable to power-down or unplug all associated components while
making or breaking any signal or AC power connections.
plaY a cd or dvd movie
• Using the supplied audio/video cable connector, connect the T 535’s
composite VIDEO OUT or S-VIDEO OUT jack to your TV/monitor’s
corresponding input. Connect likewise the T 535’s MIXED AUDIO OUT to
your TV/monitor’s applicable AUDIO input.
• Plug the AC mains plug into the AC outlet; the LED on the front panel
will be illuminated amber indicating the T 535 is in standby mode ready
to accept commands from either the front panel power switch or the
DVD 9 remote.
• To start playback of the DVD player; press the [OPEN/CLOSE] button on
the DVD 9 remote control or in the front panel.
• Insert the media and press [PLAY] button to start playback. You
should hear audio and see an image on the TV/monitor. (If one or the
other fails to appear, check your TV/monitor’s input settings or audio/
video allocation if applicable).
Enjoy the movie or music, but be sure to set aside time to read this
manual thoroughly to set up and configure your T 535 according to your
preference.
ABOUT THE T 535
Though the T 535 is among the most technically sophisticated DVD/SACD
players, we worked hard to make it one of the most musically transparent
components available as well - this is what we mean by NAD’s “Music First”
design philosophy. Here are just a few examples
• The T535 includes the High Definition Digital Interface (HDMI) with
HDCP encryption, allowing high definition audio and video signals
to be transferred between source components, processors, and TV
Displays in a pure digital format.
• Using the high quality 12-bit 216-MHz video DAC, the T 535 ensures
highly accurate playback of delicate, low-level video signals as well as
produce vivid picture that is faithful in every detail. On the other hand,
the audiophile quality 24-bit, 192-kHz audio D/A converters make the
T 535 well protected from noise caused by even minute fluctuations
in current from the power supply. This high performance audio D/A
converter ensures that all the sound you hear is as clear and noise free
as possible thereby maintaining the delivery of dynamic, smooth and
expansive audio sound.
• The T 535 has exceptional playability. It has support for DVD-Video,
DVD-R/-RW/+R/+RW, DVD-A, SACD, DivX, SVCD with or without PBC
(Play Back Control),VCD, Audio CD, CD-R/-RW and including recorded
MP3, copyright-protected WMA and JPEG files.
• Gold-surfaced connectors are employed throughout to ensure
maximum signal integrity.
6
EN
G
LIS
H
FR
A
N
Ç
A
IS
ES
PA
Ñ
O
L
IT
A
LIA
N
O
D
EU
TS
CH
N
ED
ER
LA
N
D
S
SV
EN
SK
A
РУ
СС
К
И
Й
T535_eng_OM_v07.indd 6
16/7/07 08:12:17