Nady Systems 4W-1KU Owner's manual - Quick User Controls Guide
4
Quick User Controls Guide
4W-1KU Receiver: Front View
12
GROUP CHANNEL
VOL
9
10
11
8
GROUP CHANNEL
VOL
RECEIVER 1
SET
RF
A
B
AF
IR
ASC
GROUP CHANNEL
VOL
RECEIVER 2
SET
RF
A
B
AF
IR
ASC
GROUP CHANNEL
VOL
RECEIVER 3
SET
RF
A
B
AF
IR
ASC
GROUP CHANNEL
VOL
RECEIVER 4
SET
RF
A
B
AF
IR
ASC
POWER
1
4
5
3
2
6
7
1. POWER BUTTON Press for one second to turn
both receivers ON-OFF
2. DIVERSITY A/B INDICATOR Indicates receiver
A or B is active when transmitter is on
3. AF PEAK LED Shows flickering GREEN LED is
normal or solid GREEN LED is for maximum
audio allowable
4. IR Infrared LED transmitter window for linking
the RX to the TX for frequency download
5. AUTO-SCAN/ASC (IR SYNC) BUTTON Long press
(hold ~2 seconds) for AUTO-SCAN to locate a
clear channel to use. Short press (~1 second)
to make the IR link download the receiver’s
selected frequency to the TX. To download,
positioning the HT-1KU/BT-1KU transmitters’
IR Window (34/43) by 6-12” away from the
RX IR LED (4). Press the ASC Button (5) once and
wait one second for the RX to respond. If the
download is successful, the RX will show
one of the Diversity A/B Antenna LED (2) and
full RF LCD Bars (12) on the LCD Display (8)
6. SET To scroll through the LCD menu and
set the selected program/function
7.
UP BUTTON To change the receiver output
VOL level, GRP/CH up by one step at a time
DOWN BUTTON To change the receiver
output VOL level, GRP/CH down by one step
at a time
8. LCD DISPLAY For indication of A-B Diversity,
GRP (00-09)/CH (00-99), RF signal strength
indicator 1-6 bars, and Volume Levels (0-63)
9. FREQUENCY GROUP Indicates selected GROUP
from 00-09
10. FREQUENCY CHANNEL Indicates selected
CHANNEL from 00-99
11. SUM VOLUME LEVEL Indicates selected LINE
output level from 00-63, (63 is loudest output)
12. RF SIGNAL METER Indicates received signal
strength levels from 1-6 bars, (6 bars show
excellent incoming RF signal)