Nady Systems 4W-1KU Owner's manual - Quick User Controls Guide
38
37
30
33
31
32
39
41
42
43
44
48
46
45
40
47
7
Quick User Controls Guide
BT-1KU Bodypack Transmitter (lT, lT/HM or GT)
37. INPUT JACK 3.5mm locking mini jack for
connecting audio input cord from lapel mic
(LT), Headmic
™
(LT/HM), or instrument (GT)
38. POWER OFF/MUTE/ON SWITCH Slide power
switch to ON or OFF to turn ON-OFF, set to
MUTE to turn power on with audio muted
39. ANTENNA Permanently attached antenna
40. LCD DISPLAY For indication of GRP (00-09)/CH
(00-99), AUDIO INPUT LEVEL (0dB to -30dB),
and BATTERY status (5 bars and “BATT.”
See 30/31/32/33 in HT-1KU transmitter diagram
above for detail LCD display indicators.
41.
UP BUTTON To change the GRP/CH or VOL
level up by one step at a time or to light up
the display
DOWN BUTTON To change the GRP/CH
or VOL level down by one step at a time or
to light up the display
42. SET BUTTON To scroll LCD menu and set the
selected program/function
43. IR RECEPTOR SENSOR Infrared LED sensor for
linking the TX to the RX during IR frequency
download
44. RF POWER HI/LOW SWITCH Select the TX
power level high or low output
45. BATTERY COMPARTMENT
46. LATCHING BATTERY COMPARTMENT DOOR
47. TWO AA ALKALINE BATTERIES
48. BELT CLIP (on back of unit)—removable clip
can be set for top of transmitter pointing
either up or down