Nady Systems PAS-250 Owner's Manual - Specifications

SPECIFICATIONS

AMPLIFIER AND SPEAKER SYSTEM

POWER. ........................................................250W RMS @ 6 Ω, 1%THD at 1kHz 

S/N RATIO ..........................................................................................56.5dB 

THD  ................................................................≤0.17% @1kHz   ≤0.63%@1kHz 

SPEAKERS  ................................................................................ 3” Woofer, 6Ω

FREQUENCY RESPONSE ............................................... 100kHz - 18KHz (±3dB)

SENSITIVITY @ INPUT & OUTPUT  

   • Mic/Line ............................................................................................ -37dB 

   • Max Input Level XLR  ........................................................................ .-16dBv  

   • Max Input Level 1/4”  .........................................................................  +9dB 

   • Max Output Level XLR ...........................................................................26dB

EQUALIZATION.........Single knob, clockwise increases treble; counter-clockwise increases bass 

POWER REQUIREMENTS ................. 100-120 VAC, 220-240 VAC, 50-60Hz  

DIMENSIONS (H X W X D................................8.6” x 35.8” x 3.5” (21.8cm x 90cm x 9cm)  

WEIGHT ...........................................................................20bs. (8.8 Kg)

The specifications above are correct at the time of printing of this manual.  For improvement 

purposes, all  specifications for this unit, including design and appearance, are subject to 

change without prior notice.

SERVICE FOR YOUR NADY AUDIO PRODUCT

Please do not return our product to the store where it was purchased.  Nady Systems, Inc. 

assumes the responsibility of keeping you a satisfied customer.

DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL 

ALSO VOID  THE WARRANTY.

If factory service is required, please call our Service Department at 510/652-2411 or e-mail 

service@nady.com for a return authorization (RA) number.  Make sure the RA number is 

clearly marked on the outside of the package. If unit is past the One Year Warranty, The Nady 

Service Department will provide a quote for service or replacement.  Please make sure a 

cashier’s check or money order is enclosed (if not prepaid with credit card) with the shipment 

to Nady. 

If unit is within the One Year Warranty from purchase, please check Warranty terms for 

further instruction before sending in unit.

Nady Systems will not repair nor be held responsible for any units sent without proper 

identification and return address or RA number clearly marked on the package.

For service, please ship units prepaid to:  

Nady Systems, Inc., Service Department, 6701 Shellmound St., Emeryville, CA  94608

9