Nady Systems PAS-250 Owner's Manual - page 4

IMPORTANT SAFETY INSTRUCTIONS 

Your MaxTower is made of a very durable polymer composite material. However, extra care should be 

taken to  protect the finish and speakers. These simple tips will help reduce wear and tear on your 

MaxTower.

1. Read all instructions before using. 

2. Avoid direct contact with the speaker. Care should be taken to avoid damage to speakers. 

3. Do not use or store around  excessive moisture. 

4. At very high volume this product may be capable of producing sound levels that could cause hearing 

damage. Do not operate at uncomfortable levels for prolonged periods. If hearing  loss  or ringing in ears 

in experienced, consult  a physician. 

5.  The MaxTower should  be positioned so that proper  ventilation  is maintained. 

6. Keep away  from heat  sources such as radiators, heat vents, and other  devices (including amplifiers)  

that produce heat. 

7. The MaxTower should be connected to a power supply  described in the operating instructions or as 

marked.   Replace fuse with correct type, size, and rating. 

8. The power supply cord should:  (1) be undamaged, (2) never share an outlet or extension cord with 

other  devices so that the outlet has exceeded the maximum rating, and (3) never be left plugged into the 

outlet when not being used for a long period of time. 

9.  This product should be serviced by qualified  service personnel if:  

 •  The power supply  cord or the plug has been damaged. 

 •  One of the speakers has been damaged. 

 • There  has  been excessive exposure to rain. 

 • The MaxTower does not appear to operate normally or exhibits a change in performance.  

 • The unit  has  been dropped, or the enclosure damaged. 

 • Do not attempt to service  the product  beyond  what is described in these instructions. All other repairs         

    should be referred to qualified service personnel. 

 • Clean only with damp cloth. 

 • Use only with the supplied Nady stand. 

 • Units designed with Class-I construction (like the MaxTower) must be connected to an outlet with a   

    grounded connection.

STATEMENT OF RoHS COMPLIANCE

The included electronic parts and components are covered by the European Union Removal of Hazardous 

Substances directive 2002/95/EC (RoHS). This directive seeks to eliminate the toxic substances released 

during manufacturing processes to ensure that disposed of materials do not pose health risks. Considered 

toxic substances are lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) 

and polybrominated diphenylethers (PBDE). Lead is used together with tin in solder connections to reduce 

the melting point of solder. Lead-free solder requires higher soldering temperatures which in turn places 

greater thermal stress on components.

The MaxTower complies with RoHS directives and uses components that are certified RoHS compliant. 

3