Summary of WA-120BT
Page 1
Wa -1 portable wireless pa owner’s manual 2 0 b t.
Page 3: Contents
Contents introduction ....................................................................................2 controls and connections .......................................................3 operating instructions for the nady wa-120bt ...............5 wa-120bt wireless microphone receiver operation ...
Page 4: Introduction
Thank you for purchasing a nady wa-120bt wireless portable p.A.— and congratulations on your choice. The wa-120bt is the most affordable and compact of the popular line of nady wireless p.A.’s. Ideal for many applications, including use in classrooms, conference/ meeting rooms, churches, health club...
Page 5: Controls and Connections
3 1. Wireless microphone receiver antenna pull out and extend fully for optimum range 2. Power on/off switch 3. Mic and aux signal input jacks ¼” ts (mono) 4. Speaker 5. "battery charging" led indicator 6. "rf on" led indicator indicates reception of transmitter signal 7. Volume controls 8. Tone con...
Page 6
4 11. Storage compartment for ac adapter and optional rb-120 12vdc rechargeable battery 12. Mounting hole for use with optional mst-4b tripod stand 13. Battery-mount for 8 x “d” batteries used for internal battery operation of unit 14. External dc input jack 12 14 13 11 15. Media module / mp3 player...
Page 7: Powering The Wa-120Bt
5 operating instructions for the wa-120bt powering the wa-120bt • external adapter plug the external provided ac/dc adaptor into the external dc input jack (14) socket. Then plug the ac/dc adapter plug into a standard 115vac or 240vac outlet (the ac adapter will detect the line voltage automatically...
Page 8: Wiring Illustration
The mic input (3) can be used to connect a hard wired microphone. The rec out (9) can be connected to a recording device or to the input jack of a power amplifier to further amplify and enlarge the audio power. For stereo to mono conversion of the signals, wire the connecting cord as per the followi...
Page 9: Stand Mounting The Wa-120Bt
7 stand mounting the wa-120bt the wa-120bt can be mounted on the optional mst-4b aluminum tripod stand for convenient place- ment in a higher position. Contact your dealer or the nady service department. (see page 12) the wa-120bt contains a full-featured media module insert a flash drive into the u...
Page 10
The wa-120bt contains a built-in high quality quartz-locked, fixed frequency vhf wireless receiver precisely matched to the nady wht-120 or wlt-120 transmitter supplied; therefore, generally no adjustments besides audio volume are required. • after the amplifier has been turned on by the main power ...
Page 11
Wht-120 handheld microhone transmitter • features high quality dynamic cartridge for optimum true sound, maximum feedback rejection and minimal handling noise • off/standby/on switch allows convenient audio muting with the transmitter “on” • low battery led indicator flashes once for unit “on”; ligh...
Page 12
10 wlt-120 bodypack transmitter 4 7 2 1 3 5 6 the nady wlt-120 is a rugged compact bodypack designed for use with lavalier or headworn mics, and includes these special features: • off/standby/on switch allows convenient audio muting with the transmitter “on” • low battery led indicator flashes once ...
Page 13
Transmitter set-up and operation • open the battery compartment (1) and insert 2 fresh aa batteries, observing the correct polarity. Close the compartment. • the wlt-120 is provided with a 3.5 mm locking jack (2) for connecting the microphone. Plug in either the lavalier/lapel (7) or the headworn mi...
Page 14: Specifications
12 audio power output: 20w maximum, 4 ohms external dc power: internal batteries: input sensitivity/ frequency response: 15vdc, 1200ma ac adapter 8 “d” size alkaline batteries (sum-1) or optional 12v/1.2a (rb-120 rechargeable battery) w/l mic: -52db ±2db, 150-15khz ±3db mic: -52db ±2db, 150-15khz ±3...
Page 15
Service (u.S.) should your nady wa-120bt require service, please contact the nady customer service department via telephone: (510) 652-2411 or e-mail: support@nady.Com. (international) for service, please contact the nady distributor in your country through the dealer from whom you purchased this pr...
Page 16
Nady wireless systems are type accepted under fcc rules parts 90, 74 and 15. This device complies with rss-210 of industry & science canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference recei...