Nady Systems WA-120BT Owner's Manual - Powering The Wa-120Bt
5
OPERATING INSTRUCTIONS FOR THE WA-120BT
Powering the WA-120BT
•
External Adapter
Plug the external provided
AC/DC Adaptor into the External DC input
jack (14) socket. Then plug the AC/DC adapter plug into a standard
115VAC or 240VAC outlet (The AC adapter will detect the line voltage
automatically). Turn on the unit using the
Power switch (2).
(Note: To avoid damaging your unit, use only the provided AC adapter)
•
RB-120
The WA-120BT can be powered internally using the optional RB-120 re-
chargeable battery. Observe the RB-120 battery positive (+) and negative
(-) polarities when installing it into the
Optional RB-120 rechargeable
battery slot (11) while the WA-120BT is connected to AC power with the
provided AC adapter. If the
Battery charging LED (5) turns red, the
RB-120 is not fully charged and should be allowed to charge while the
WA-120BT is powered by the AC adapter. (Note: Turning off the
WA-120BT
Power switch (2) will allow the RB-120 to recharge more
quickly.) If the
Battery charging LED indicator (5) lights green, the
RB-120 is fully charged and ready to power the WA-120BT alone. Shut off
the
Power switch (2) and disconnect the AC adapter. Turn the unit back
“ON” and the RB-120 will power the unit while still connected to the
optional RB-120 rechargeable compartment (11). The RB-120 can be
easily stored in the
Storage compartment (11) while in use or
transporting.
(Note: Connecting the AC adapter will automatically charge the internal
RB-120 battery power.)
(Note: Connecting the AC adapter will automatically disconnect the inter-
nal “D” cell batteries. The WA-120BT does not recharge “D” cell batteries.)
•
(8x) “D” Cell Batteries
The WA-120BT can also be powered internally with (8x) ”D” cell batteries.
Insert the batteries while observing the correct polarity as marked. For
longest operation use only alkaline or rechargeable batteries. Replace the
batteries when the output volume drops or the range of the wireless
decreases.
(Note: The WA-120BT does not recharge “D” cell batteries.)