Nady Systems WA-120BT Owner's Manual - page 10
The WA-120BT contains a built-in high quality quartz-locked, fixed
frequency VHF wireless receiver precisely matched to the Nady
WHT-120 or WLT-120 transmitter supplied; therefore, generally no
adjustments besides audio volume are required.
• After the amplifier has been turned on by the main
Power switch
(2), turn the wireless receiver’s W/L MIC Volume control (7)
slightly clockwise.
• Switch on the wireless microphone and the
RF receiving indicator (6)
will light up indicating normal reception.
• Adjust the W/L MIC
Volume control (7) clockwise (CW) for the
desired audio level.
Note: If using more than one wireless microphone (handheld and/or
bodypack) on the same frequency, switch only one on at a time.
Microphones on the same frequency will interfere with each other.
However, one wireless microphone can be used with two or more
WA-120BT wireless amplifiers with the same frequency simultaneously
to increase the overall sound level.
WA-120BT WIRELESS MICROPHONE RECEIVER OPERATION
8
Note: If pressed for a second or more, the "Previous Track" (f) and "Next
Track"
(g) buttons allow you to adjust the internal volume of the media
module. If loss of volume occurs with the media module, hold the "Next
Track" button until mamimum volume has been reached.