NAG SNR-CI-M Series User Manual - Snr-Ci-M Series
SNR-CI-M Series
Network IP Cameras User Manual
5
I. Important Safeguards
1.
All the safety and operating instructions should be read before the units is operated.
2.
This unit should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply you plan to use, consult your appliance
dealer or local power company. For units intended to operate from battery power or other
sources, refer to operating instructions.
3.
During the course of transportation, storage and installation, the product should be avoided
from incorrect operations such as heavy pressing, strong vibration etc., which can cause
damage of product as there are sophisticated optical and electronic devices inside the
machine.
4.
Do not attempt to disassemble the camera. In order to prevent electric shock, do
not remove screws or covers. There are no user-serviceable parts inside.
5. Always follow all electrical standards for safety when it is in operation. Adopt the
particular power supply which is provided with the unit. RS-485 and video signal
should keep enough distance with high voltage equipments and cables when they
are in transmission. Precautions for anti-lightning and anti-surging should be
taken if necessary.
6. Do not operate it in case temperature, humidity and power supply are beyond the
limited stipulations.
7. Do not let the camera aim at the sun or the object with extreme light whatsoever it
is switched on or not. Do not let the camera aim at or monitor bright and standstill
object for a long time.
8. Do not use aggressive detergent to clean the main body of the camera. Wipe dirt
with dry cloth. If needed, mild detergent can be used suitably.
9. Operate the intelligent speed dome camera with great care to avoid shock or
vibration. It operate incorrectly, the Speed Dome could be damaged.
10.Do not place this unit on an unstable stand, tripod,
bracket, or mount. The unit may fall, causing
serious injury to a person and serious damage to the
unit. Use only with a stand, tripod, bracket, or
mount recommended by the manufacturer or sold
with the product. Any mounting of the unit should
follow the manufacturer’s instructions and should
use
mounting
accessory
recommended
by
manufacturer.
11.If necessary, use a commercial lens cleaning paper to clear the lens windows.
Gently wipe the lens window until clean.