Summary of Deep Silence 6 Revision B
Page 2
_______________________________________________________________ 02 ___________________________________________________________ 02 _________________________________________________________________ 03 _________________________________________________________________ 03 ________________________________...
Page 3
En i. Introduction congratulations on the purchase of your new nanoxia deep silence 6 revision b. We are confident that you will be delighted by your new pc case for many years to come. The nanoxia deep silence series has already won more than 100 awards from the international trade press. The innov...
Page 4
Accessories rubber sealings for tube holes eps 4+4-pin extension 24-pin atx extension fan screws stand-offs for mainboard screws for mainboard mounting screws for hdd mounting screws for 3.5” mounting frame mounting screws for 2.5“hdd/ssd mounting screws for 2.5“hdd/ssd (long) mounting screws for ps...
Page 5
Noise insulation the nanoxia deep silence 6 rev. B has been developed with the aim of offer the buyer a low- noise case, while at the same time allow for extremely low system temperatures. The noise insulation concept is based on multiple interacting design elements: the most important part is the l...
Page 6
The innovative nanoxia active air chimney makes it easy to adapt the case to your needs. Under extreme conditions you can counteract heat generation under the top cover effectively: the two pre-installed fans under the cover will be automatically enabled if the chimney is opened. Thus the warm air i...
Page 7
The bracket can be used to install a 120/40/240/280 mm radiator. If necessary, the radiator can then even be equipped with fans on both sides. Due to the generous proportions of the case, spacing problems are of no concern. If you want to mount a compact water cooling system on the mounting bracket,...
Page 8
Ii. Installation instructions 1. Installing the motherboard you can mount htpx, e-atx, xl-atx, atx, m-atx and mini-itx motherboards in the deep silence 6 rev. B. In order to ensure an easy installation of your motherboard, we suggest the following procedure: please consult the following charts to fi...
Page 9
Next you should mount the cpu cooler - for very large cpu coolers, the attachment of the eps extension cable after installation can be difficult. Now place the motherboard gently inside the case and lead the eps extension cable through the opening provided in the top left of the mainboard tray. Fix ...
Page 10
2.2 utilizing the external 3.5 inch bay if you for example desire to place a 3.5 inch card reader, you can use one of the two internal adaptors for this purpose. Please remove the 5.25 inch cover first. Open the two quick release of the 5.25 inch bay and remove the mounting frame. Then attach the ca...
Page 11
The hard drives slides offer a second pair of mounting holes, so it is possible to shift the position of the drives. Those are marked in blue on the picture. To lock the drive, push the bracket with the drive back installed back into the slot until the bracket is re-engaged. 3.2 utilizing the 6 x 2....
Page 12
Position 01 position 02 position 03 position 04 position 05 position 06 the hdd cage can easily be moved to another position if necessary. To do this, please first remove the four screws that hold the cage on the bottom. Please refer to the drawing for the different mounting points of the cage. 4. R...
Page 13
5. Fan assembly five 140 mm fans are pre-installed in your new case. You can mount up to twelve fans in total. We recommend the use of the 120 or 140 mm nanoxia deep silence fans, available separately. These are technically and visually equivalent to the factory-installed case fans and will work in ...
Page 14
5.2 fans in the top cover two 140 mm fans are pre-installed under the top cover. If required, a total of three 120 or 140 mm fans can be mounted. If you want to install more fans at the top of the case, please remove the plastic cover first ( see chapter 4.2 ). Then hold the fans from the inside and...
Page 15
The bracket offers mounting holes both for 120 and 140 mm fans; install the fans, then attach the bracket with the four screws back to the hdd-cage, as can be seen in the picture. If you install case fans in the mounting bracket, those should support the movement of air from front to back. 5.4 fans ...
Page 16
The dust filter at the bottom can be pulled out for easy cleaning. F you secure the cover in the side panel again after the removal of a side fan, please make sure not to tighten the screws not too much. To avoid damage to the internal thread or the side panel, the screws should be tightened by hand...
Page 17
The fan controller is not designed for the operation of powerful fans. Please take this into account in particular when using fans from other manufacturers. The maximum power per channel must not exceed 18 watts. 6.2 operation of the 2-channel fan controller the sliders for controlling the fans cont...
Page 18
7.2 operation of the active air chimney in order to open the air chimney, slid the dial to the “open” position. This automatically activates the pre-installed case fans under the top cover. To close the air chimney simply slide the tab back in the opposite position. This will also deactivate the fan...
Page 19
For maximum cooling capacity of your radiator, you can then mount up to two additional 140 mm or 120 mm fans on top of the radiator. If you use a very large radiator, it may be that the hose connectors block the mounting screws of the frame. In this case, please use the special, included thumbscrews...
Page 20
For the installation, remove the top plastic cover ( see chapter 4.2 ) as well as the right side panel (seen from the front) and remove the pre-installed 140 mm fans. Please keep in mind to release the fan cable from the circuit board of active air chimney ( see chapter 7.2 ). Hold the radiator from...
Page 21
Iii. Support dear customer, the pc case you purchased has undergone a very thorough quality control. Nevertheless, should there be any unexpected problems with your case we ask that you first approach the dealer where you purchased the product. They are prepared to assist you with competent and unco...
Page 22
© nanoxia 2014.