National Instruments PXIe-7902 Getting Started Manual - page 4
Preparing the Environment
Ensure that the environment you are using the PXIe-7902 in meets the following
specifications.
Caution
Do not use the PXIe-7902 in a manner not specified in this document.
Product misuse can result in a hazard. You can compromise the safety protection
built into the product if the product is damaged in any way. If the product is
damaged, return it to NI for repair.
Operating ambient temperature
(IEC-60068-2-1, IEC-60068-2-2)
0 °C to 40 °C
Operating relative humidity
(IEC-60068-2-56)
10% to 90%, noncondensing
Maximum altitude
2,000 m (800 mbar)
(at 25 °C ambient temperature)
Pollution degree
2
Indoor use only.
Note
Refer to the PXIe-7902 Specifications at
ni.com/manuals
for complete
specifications.
Installing the Software
You must install the NI LabVIEW Instrument Design Libraries for High Speed Serial
Instruments driver software before installing the PXIe-7902.
1.
Install LabVIEW. Refer to the LabVIEW Installation Guide for installation instructions
and system requirements. Refer to the LabVIEW Upgrade Notes for additional
information about upgrading to the most recent version of LabVIEW.
Documentation for LabVIEW is available at
ni.com/manuals
and by selecting Start»All
Programs»National Instruments»LabVIEW»LabVIEW Manuals.
2.
Install the LabVIEW FPGA Module. Refer to the LabVIEW FPGA Module Release and
Upgrade Notes for installation instructions and information about getting started with the
LabVIEW FPGA Module.
Documentation for the LabVIEW FPGA Module is available is available at
ni.com/
manuals
and by selecting Start»All Programs»National Instruments»LabVIEW»
LabVIEW Manuals.
3.
Install the NI LabVIEW Instrument Design Libraries for High Speed Serial Instruments
Help driver. Refer to the NI High Speed Serial Instruments Readme on the NI LabVIEW
Instrument Design Libraries for High Speed Serial Instruments installation media for
system requirements and installation instructions for the NI LabVIEW Instrument Design
Libraries for High Speed Serial Instruments driver.
4
| ni.com | PXIe-7902 Getting Started Guide