NATURSCHALLWANDLER ETERNITA Assembly And Installation Instructions
Page 1
NATURSCHALLWANDLER
®
ETERNITA
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Our cordial Thank You for purchasing a NATURSCHALLWANDLER
l
System of MUNDUS GmbH!
Our instructions below are intended to facilitate the correct installation of your NATURSCHALLWANDLER
l
system and make it easier to connect it properly to your home entertainment equipment. Choosing the right place
and establishing the proper cable connections are vital prerequisites to allow the unique sound characteristics of this
system to unfold in your own private environment.
1.) Components of the ETERNITA NSW system
Your system includes the following components:
- 2 speaker columns
- 2 speaker cables 2x6 metres
- 4 audio crossover cable links
-
2
protective fabric covers
2.) Unpacking the system
Your NSW ETERNITA is shipped in robust, re-usable
transport boxes by a MUNDUS specialist supplier or by a
forwarding agent commissioned by MUNDUS GmbH.
Please open both transport boxes and place the box
covers aside.
ETERNITA is additionally protected with a fabric cover.
The bottom part of ETERNITA is provided with a carrying
strap (see Fig. 2).
Hold the speaker at the bottom carrying strap and
one of the robust stainless-steel braces on the upper part
(underneath the fabric cover). Then carefully lift it out of the
transport box and place it in the desired position in your
room.
Repeat the procedure with the second speaker.
3.) Setting up your listening place
We recommend setting up a listening place, so as to
experience the unique holographic qualities of the NSW.
Position the two speakers to the left and right of your
selected listening place. This place (couch, armchair,
deckchair) can be located in the centre of your room or in
front of a straight wall. Depending on the room size and
architecture, the distance between the speakers may vary
between 3 and 8 metres (see Fig. 1).
Fig. 1
Setup of listening place
Fig. 2
System:
ETERNITA
Sheet:
Assembly and
Installation
Instructions
Date:
01 Dec 2010
(Nature Sound Converter)
Holographic Speaker Systems