Nautilus R514c Assembly Manual - page 37
37
Nospeed/RPMreading,
Consoledisplays“E3”error
code
Checkdatacableintegrity
Allwiresincableshouldbeintact.Ifanyarecut
or crimped, replace cable.
Checkdatacableconnections/
orientation
Makesurecableisconnectedsecurelyand
orientedproperly.Smalllatchonconnector
should line up and snap into place.
Checkmagnetposition(requiresshroud
removal)
Magnetshouldbeinplaceonflywheel.Ifno
magnet is present, replace the flywheel or the
entirebaseunit(ifunabletoreplaceflywheel).
CheckRPMSensor(requiresshroud
removal)
RPMsensorshouldbealignedwithmagnet
and connected to data cable. Realign sensor if
necessary. Replace if there is any damage to the
sensor or the connecting wire.
Consoleshutsoff(enters
sleepmode)whileinuse
Checkdatacableintegrity
Allwiresinthecableshouldbeintact.Ifanyare
cut or crimped, replace cable.
Checkdatacableconnections/
orientation
Makesurecableisconnectedsecurelyand
orientedproperly.Smalllatchonconnector
should line up and snap into place.
ResetMachine(ifequippedwithreset
button)
Unplugunitfromelectricaloutletfor3minutes.
Reconnect to outlet. After the Console powers
up,press“reset”.
Checkmagnetposition(Technician
onlyrequiresshroudremoval)
Magnetshouldbeinplaceonflywheel.Ifno
magnet is present, replace flywheel or entire
base unit.
CheckRPMSensor
Contact Customer Care for further assistance.
Fan(ifequipped)willnotturn
on or will not turn off
Checkdatacableintegrity
Allwiresincableshouldbeintact.Ifanyarecut
or crimped, replace cable.
Checkdatacableconnections/
orientation
Be sure cable is connected securely and
orientedproperly.Smalllatchonconnector
should line up and snap into place.
ResetMachine(ifequippedwithreset
button)
Unplugunitfromelectricaloutletfor3minutes.
Reconnect to outlet. After Console powers up,
press“reset”.
Unitrocks/doesnotsitlevel
Checkleveleradjustment
Leveling feet may be turned in or out to level
bike.
Checksurfaceunderunit
Adjustment may not be able to compensate for
extremelyunevensurfaces.Movebiketolevel
area.
Pedalsloose/unitdifficultto
pedal
Checkpedaltocrankconnection
Pedalshouldbetightenedsecurelytocrank.Be
sureconnectionisnotcross-threaded.
Checkcranktoaxleconnection
Crankshouldbetightenedsecurelytoaxle.Be
surecranksareconnectedat180degreesfrom
each other.
Seatpostmovement
Checklockingpin
Besureadjustmentpinislockedintooneofthe
seat post adjustment holes
Checkadjustmentknob
Besureknobissecurelytightened.