NAVICOM RT-650 Owner's manual - page 16
31 32
Item
Description
BUDDY LIST
Selects the Buddy List Entry routine to enter
Names and MMSI's for frequently called DSC
stations. Up to 20 names could be stored.
BACKLIGHT
Set the backlight level, total 8 level be available.
CONTRAST
Selects display contrast setting: 1-8 levels.
LOCAL/DIST
“DISTANT” allows normal receive sensitivity; and
“LOCAL” eliminates receiver noise, but degrades
receiver sensitivity meanwhile LOCAL icon
displayed on LCD.
GPS/TIME
Set the Position info if no GPS attached and
define the display POS and Time format, Offset ,
COG/SOG, display GPS alert settings.
RADIO SETUP
There are
5
items that user can cu
stomize –
Language, CH Name, Ring Tone Volume, Button
Beep Volume and INT Speaker On/Off.
DSC SETUP
There are
6
functions that allow user to alter –
User
MMSI entry, Group Setup, ATIS MMSI, ATIS
ENABLE, DSC ENABLE, and POS Reply
AIS SETUP
There are 2 items to setup the AIS display and
output parameters
HS SETTING
Subscribe to link the wireless handset
RESET
Recall factory default setting
EXIT
Escape from the Setup Menu
6.2 SET-UP MENU NAVIGATION
1) To access the Menu Mode:
Press and hold
MENU/DSC
button, Text area displays the Set-Up Menu list.
2) To exit the Menu mode or sub –mode:
Press the 16 or CANCEL button or else select the EXIT option from the
menu.
3) Rotate the
CH
knob to select the Item within the Set-Up Menu list
To confirm a selected item for adjustment, push the
CH
knob.
When the desired setting is done, press the
CH
knob to enter the setting,
and move back to the Main Menu list.
4) Set Up operation is exited by turning the unit off. All changes are saved in
EEPROM.
6.3 BUDDY
LIST
The Buddy List can store up to 20 entries with Name and MMSI. User can
add, edit or delete the record from the list under this submenu.
6.3.1 ADDING
AN
ENTRY
1)
Select Buddy List and the cursor is at
CH
knob entry
page which prompt up to allow enter Name and MMSI.
2) Rotate
the
CH
knob to select the first desired character (A-Z, 1-9,
Space and Back Arrow ">") for the name. When the desired
character is shown, push the
CH
knob to enter, Same select the
next characters, The characters can be up to 12. When the last
digit is entered, the activation advances to the first MMSI digit.
3)
Enter the MMSI associated with that buddy name (this must be
numeric) Prefix 00 will treat as Coast Once 9 digit be entered, pops
up a new page to ask for confirmation to save.
4) Press
the
CH
knob to save the new entry, which is displayed at the
top of your BUDDY LIST.
5) Press
CANCEL
will terminate the process without saving go back
to Buddy list page.
6)
When the buddy list is full. you can make a new entry and the
buddy at the end of the list is automatically erased.
6.3.2
EDIT EXISTING ENTRY
1)
Pick up one from BUDDY list and edit Press
CH
knob one Page
pops up item for you to edit or delete, Choose EDIT.
2)
when you are finished editing. Press
CH
knob into a new page
prompt in to ask for confirmation to save.