NAVICOM RT-650 Owner's manual - page 17
33 34
3) Press
the
CH
knob to save the new edit. The BUDDY list is
displayed again. If more changes are required repeat steps from 1
to 3 otherwise, press cancel to exit.
6.3.3 DELETE
AN
ENTRY
1)
Select the one which you want to delete from the list.
2) Rotated
the
CH
knob to select the Delete option.
3)
Press and hold the he
CH
knob to confirm the delete action.
4)
The selected record will be removed and go back to BUDDY list
page. You can repeat steps from 1to 4 to delete more records, or
press cancel to exit.
6.4 BACKLIGHT ADJUSTMENT
1) Select
BACKLIGHT
and press the
CH
knob. There are 8 levels control for
the BACKLIGHT.
2) Rotate the
CH
knob to adjust the setting, Press the
CH
knob to
permanently enter the setting and return to the MENU LIST.
6.5 CONTRAST
ADJUSTMENT
1) Select
CONTRAST
and press the
CH
knob. There are 8 levels
control for the contrast.. The higher numbers the darker LCD
2) Rotate
the
CH
knob to adjust the setting, Press the
CH
knob to
permanently enter the setting and return to the MENU LIST.
6.6 LOCAL/
DISTANT
You can set the receiver to LOCAL to eliminate noise, select the LOCAL/DST
from the MENU list for local and press the
CH
knob. The local state is stored
when screen is exited. The
icon turns ON in the LCD. Default is
DISTANT
6.7 GPS/TIME
The radio automatically detects NMEA strings and decodes appropriate
latitude/longitude position and time. If the GPS navigation receiver is not
connected on or is not functional, a manual latitude/longitude position and
UTC should be entered and used in the DSC distress transmitted message.
When valid Lat/Lon information is detected, the data is display on the LCD,
when there is no valid position information, NO GPS INFORMATION appears.
6.7.1
MANUAL ENTER GPS DATE
If no GPS data is available, the NO GPS INFORMATION appears, and
after 2 minutes PLEASE INPUT POSITION! is displayed with NO GPS,
Alarm sounds for 10 sec or till any button is pressed.
The manual entry function is just valid if and only if no GPS connected
1)
Select GPS/TIME then manual
2)
Enter the latitude, then the longitude, then the UTC.
3) Press
the
CH
knob, when all the information is correct.
The vessel’s lat/Lon with the UTC time are shown on the screen. The
manual entries are cancelled if a real GPS position is received.
6.7.2 SETTINGS
You can also set what time and position information is display on the screen
Whether Position date is displayed
Whether the time is displayed
Whether a Time Zone Offset is used
How the time date is formatted
Whether COG/SOG date is displayed
Whether GPS alert is on/off
6.7.2.1 POSITION DISPLAY ON/OFF
You can choose the position data displayed on the normal mode or not
1)
Select GPS/TIME then SETTINGS, then POS DISPLY
MENU SELECT
BUDDY LIST
BACKLIGHT
> CONTRAST
CONTRAST
……
LO_____HI
PRESS ENT
DISTRESS
PLEASE INPUT
INFORMATION!!
GPS / TIME
>MANUAL
SETTINGS
DISTRSS
22 º 28.1111 N
112 º 11.0011 W
08:25 UTC
MANUAL POS
- - º - -.- - - - N
- - - º- -.- - - - W
MAN - -: - - UTC
MENU SELECT
BACKLIGHT
CONTRAST
> LOCAL/DIST
SENSITVITY
>DISTANT
LOCAL
MENU SELECT
BUDDY LIST
>BACKLIGHT
CONTRAST
BACKLIGHT
…
LO_____ HI
PRESS ENT