Navigon 40 essential User Manual - page 121
User's manual NAVIGON 40 Essential | Easy | Plus | Premium | Premium Live
Troubleshooting
- 121 -
It seems to me that the battery of my navigation device becomes flat
relatively quickly when the device is not connected to an external power
supply.
Some settings can be configured so that energy consumption is
minimised.
1. In
the
N
AVIGATION
window tap on Options > Settings > General.
2. Set the values for Brightness Day and Brightness Night as low as
possible.
3. Tap
on
OK.
4. Tap
on
(Back).
The N
AVIGATION
window is now open again.
I have accidentally activated demo mode.
If you have accidentally activated demo mode when you start the
navigation application for the first time, you can deactivate it again as
follows:
1. In
the
N
AVIGATION
window, tap on Options > Settings.
The S
ETTINGS
window is opened.
2. Tap
on
Options > Stop Demo Mode.
You will be prompted to confirm that you want the device reset to
the as-delivered state.
3. Tap on the Yes button.
The software is re-started and behaves as if started for the first time
after being purchased (refer to "Switching on the navigation device"
on page 18).
Start the navigation software and set the Start in Demo Mode
setting to No. (Refer to "Starting the navigation application" on
page 27.)
Note: Use only accessories that are recommended by NAVIGON
expressly for your navigation system. NAVIGON AG accepts no liability
for errors or damages resulting from the use of other accessories.
For suitable accessories go to
www.navigon.com
or your authorised
dealer.