Navigon 40 essential User Manual - page 95
User's manual NAVIGON 40 Essential | Easy | Plus | Premium | Premium Live
Handsfree Module
- 95 -
1. Make sure that the Bluetooth function is activated on both the
mobile phone and the navigation device. To perform the pairing
from the mobile phone, the functions Discoverable by Others and
Others May Connect must also be activated on the navigation
device.
(Refer to "Configuring the hands-free function" on page 104.)
2. Using your mobile phone, search for other Bluetooth devices.
The navigation device is detected as NAVIGON.
3. Initiate a connection to the detected NAVIGON device.
The mobile phone prompts you to enter a password.
4. Enter a password (1-16 digits).
The navigation device prompts you to enter a password.
5. Enter the same password in the Key box as on the mobile phone
and tap on (OK).
The pairing is performed and a connection is set up between the
two devices. The connected device is indicated in the T
RUSTED
D
EVICES
list.
►
If the new device is a headset, the symbol will appear to the
right of its name in green colour. The connection to any mobile
phones will be disconnected if applicable.
►
If the new device is a mobile phone, one of the two symbols will
appear to the right of its name in green colour depending on
whether it is connected as Phone 1 or as Phone 2.
9.1.3
Connecting to a device
In this case "connection" refers to any subsequent connections
between Bluetooth devices which have already been paired. No further
password entry is necessary when connecting.
1. Make sure that Bluetooth is activated on your navigation device.
►
If you want to connect to a mobile phone, make sure that Bluetooth
is activated on the mobile phone and that the Discoverable by
Others and Others May Connect settings are activated.
Note: The exact designation of these settings may vary from
manufacturer to manufacturer. For more details refer to your mobile
phone manual.
►
If you want to connect to a headset, make sure that the headset is
switched on.