Navigon 40 essential User Manual - page 64

User's manual NAVIGON 40 Essential | Easy | Plus | Premium | Premium Live 

- 64 - 

Working with the map 

Operating the map 

 Zoom Out: The map section shown becomes larger, but you will see 

fewer details. 

 Zoom In: The map section becomes smaller, but you will see more 

details. 

  Centre the position: During pedestrian navigation you can shift the 

visible map section in order to view the surrounding area on the map. 

This may mean that your current position can no longer be seen on the 

visible section of the map. 

► 

Tap on the Centre the position button if your current position can no 

longer be seen on the visible section of the map. 

Your current position will be shown again on the map. 

 Recalculate route: Recalculates the route. Use this function if you have 

wandered far from the calculated route and would like a new route 

proposal. 

7.5.3 

Navigation in Track mode 

This mode becomes active if you have planned a route with a track for 

the navigation. (Refer to "Tracks and multi-leg routes" on page 43.) 

After the route was shown in Preview mode, navigation was started. 

First the navigation guides you from your current location to the 

beginning of the loaded track. This navigation corresponds to the 

navigation of the selected route profile. (Refer to "Navigation in Vehicle 

mode" on page 57 and to "Navigation in Pedestrian mode" on page 62.) 

As soon as the first recorded point of the track is reached, the 

navigation switches to Track mode. 

Navigation in Track mode works like navigation in Pedestrian mode. 

(Refer to "Navigation in Pedestrian mode" on page 62.) 

There are only a few differences: 

► 

The Recalculate route function is not available. 

► 

If more route points follow after the track, the navigation will switch 

back to the originally selected mode.