Navigon 8410 premium edition User Manual - page 26
User’s manual NAVIGON 8410 PREMIUM EDITION | 8450 LIVE PREMIUM EDITION
- 26 -
Operating the navigation system
(Red)
Connecting: There is no connection yet to the NAVIGON Live
server. This can be due to the following:
►
The mobile radio connection is interrupted.
►
The NAVIGON Live module is not connected or is wrongly
connected (refer to"Connecting the NAVIGON Live module to the
navigation device" on page 18).
►
The NAVIGON Live services are deactivated (refer to "Configuring
the NAVIGON Live services" on page 128
.
).
►
The NAVIGON Live server is not answering.
(Light
grey)
NAVIGON Live Services Ready: There is a connection to
the NAVIGON Live server. The NAVIGON Live services are available.
Traffic Information
TMC
The navigation system has an integrated TMC receiver which supplies
up-to-date traffic information. Using this information the navigation
system can change your route dynamically, for example in order to
avoid a traffic jam.
Note: This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
The TMC symbol can display the following TMC reception status:
Tuning (in red): The TMC receiver is operational but cannot find a
transmitter that is sending TCM signals. There are no active traffic
messages.
Tuning: The TMC receiver is operational but cannot find a station that
is transmitting TMC signals. Traffic messages are active however. This
can be the case, for example, when travelling through a tunnel.
TMC on Standby (in grey): Traffic messages can be received.
Note: The TMC antenna is integrated in the car charger cable. The
Tuning symbol may still appear therefore when the car charger cable is
not connected to the navigation device.
For details of the TMC function refer to chapter "TMC (Traffic
Information)" on page 94.
Traffic Live
This section is relevant for you only if you have connected a
NAVIGON Live
module to your navigation device.