Navigon 8410 premium edition User Manual - page 74
User’s manual NAVIGON 8410 PREMIUM EDITION | 8450 LIVE PREMIUM EDITION
- 74 -
Working with the map
9.5.4
Navigation in Offroad mode
Note: This mode does not become active if you have selected a
pedestrian route profile for the navigation. These profiles can be
identified by the
(Pedestrian) symbol.
Nor does it become active if you are navigating along a track (refer to
"Navigation in Track mode" on page 73).
If you enter a destination which lies off the digitalised road system, the
navigation will guide you first in Vehicle mode to the point of the
digitalised road system that lies nearest to the destination. From here
the navigation then continues in Offroad mode.
If the current position at the beginning of navigation lies off the
digitalised road system, the navigation will guide you first in Offroad
mode to the nearest point of the digitalised road system. From here the
navigation then continues in Vehicle mode.
Navigation in Offroad mode works like navigation in Pedestrian mode
(refer to "Navigation in Pedestrian mode" on page 71).
There are only a few differences:
►
The part of the route already covered is not shown.
►
The Recalculate route function is not available.
9.5.5
Map options in Navigation mode
1. Call up the button bar (refer to "Dynamic button bar" on page 62).
2. Tap
on
(Options).
A window with several buttons opens.
The most important functions for navigation can be reached via buttons
with symbols.
Other functions are found by tapping on one of the buttons Destination,
Route, Services or General.
A description of all available options can be found in the chapter
"Options" on page 58.
9.5.6
Quitting navigation
You quit the navigation in the same way in all modes:
►
Tap on
(Back) in order to quit navigation. A dialog box will
prompt you to confirm.