Naxa NAS-3046 Instruction Manual - page 4
Page 4
Naxa Electronics
About the Status Indi-
cator
The status indicator lights up to let you know which
mode the speaker is in.
Status indicator
Speaker Mode
Steady red when the speaker is
connected to USB power
The speaker is charging
Off when the speaker is con-
nected to USB power
The speaker is fully charged
Flashing quickly blue
The speaker is in pairing
mode (ready to connect to a
Bluetooth
®
device)
Steady blue
The speaker is connected to a
Bluetooth
®
device
Flashing blue every few
seconds
The speaker is connected to
and playing music from a
Bluetooth
®
device
Pairing a Device with
Bluetooth
®
A device must be paired with the speaker before using
them together for the first time.
When you turn on the speaker, it will automatically
search for a paired device. If it does not detect a paired
device, it will switch to Pairing mode (the status indi-
cator will flash blue quickly). Then:
1. Make sure Bluetooth
®
is enabled on your device.
Enable it if it hasn’t.
2. Use your device to search for available Bluetooth
devices. (This function is usually in the Bluetooth
settings menu; refer to your device’s instruction
manual to learn more.)
3. The speaker will announce itself as “NAXA NAS-
3046.” Select it from the list of devices.
4. If your device asks for a passcode, use “0000” to
complete the pairing process.