Naxa NAS-3046 Instruction Manual - page 6
Page 6
Naxa Electronics
Using the microSD Card
Player
Load a microSD card that contains MP3 audio files into
the microSD card slot of the speaker. Turn the speaker
on, then press and hold /M to set the speaker mode
to microSD.
To do this...
...do this
Start, pause, or resume audio
playback
Press /M.
Change the speaker mode be-
tween Bluetooth and microSD/
FM Radio
Press and hold /M.
Skip to the previous track
Press –/
.
Skip to the next track
Press
/+.
Decrease the volume level
Press and hold –/
.
Increase the volume level
Press and hold
/+.
L
⚠
Do not remove the microSD card while the
speaker is on.
Using the FM Radio
Turn the speaker on, then press and hold /M to set
the speaker mode to FM Radio.
L
L
The microSD card slot must be empty in
order to access FM Radio mode.
L
⚠
Do not remove the microSD card while the
speaker is on.
To do this...
...do this
Auto scan for a station within
reception range
Press /M.
Change the speaker mode be-
tween Bluetooth and microSD/
FM Radio
Press and hold /M.
Manually tune to a lower
frequency
Press –/
.
Manually tune to a higher
frequency
Press
/+.
Decrease the volume level
Press and hold –/
.
Increase the volume level
Press and hold
/+.