Naxa NAS-3049 Instruction Manual - page 5

www.naxa.com 

Page 5

Connecting Power

Your speaker can be powered by the included recharge-

able battery. Upon initial use, the battery should be 

charged fully to ensure optimal performance and bat-

tery life.

Installing the Battery:

1.  Remove the cover of the battery compartment [11] 

found on the back of the speaker.

2.  Place the rechargeable battery (BL-5C) in the bat-

tery compartment, taking care to match the +/–  

poles of the battery  with the markings in the com-

partment.

3.  Replace the cover of the battery compartment.

Charging the Battery

Use the included USB cable to connect the speaker to a 

USB power source to charge the battery. 

 • Connect the small end of the cable to the USB 

charge port of the unit.

 • Connect the large end of the cable to a high-power 

USB port of a computer. The computer should be 

powered on.

The status LED will light a steady red when the battery 

is charging. When charging is complete, the status LED 

will darken.

⚠

⚠

DO NOT USE the speaker while charging 

the battery. To use the speaker while con-

nected to a USB power source, remove the 

battery first.  

Do not charge the battery for more than 

5 hours at a time as this may shorten the 

operational life of the battery.

⚠

L

It takes approximately 2 hours to charge 

the unit fully when connected to a stan-

dard USB port.