Naxa NAS-3049 Instruction Manual - page 7
www.naxa.com
Page 7
Pairing a Device with
Bluetooth
®
A device must be paired with the speaker before using
them together for the first time.
When you turn on the speaker, it will automatically
search for a paired device. If it does not detect a paired
device, it will switch to Pairing mode (the status indi-
cator will flash quickly). Then:
1. Make sure Bluetooth
®
is enabled on your device.
Enable it if it hasn’t.
2. Use your device to search for available Bluetooth
devices. (This function is usually in the Bluetooth
settings menu; refer to your device’s instruction
manual to learn more.)
3. The speaker will announce itself as “NAXA NAS
-3049.” Select it from the list of devices.
4. If your device asks for a passcode, use “0000” to
complete the pairing process.
When the speaker is paired and connected to a device,
the status indicator will light a steady red.
Using the Speaker
When the speaker is connected to a Bluetooth
®
device:
To do this...
...do this
Start, pause, or resume audio
playback
Press PLAY/PAUSE.
Skip to the previous track
Press PREV/VOL–
Skip to the next track
Press NEXT/VOL+
Decrease the volume level
Press and hold PREV/VOL–
Increase the volume level
Press and hold NEXT/VOL+
Switch the audio source mode
Press MODE.