Naxa NPB-267 Instruction Manual - page 11
www.naxa.com
Page 11
To search for a particular passage during playback:
• Press and hold the or button to quickly scan
through the current track. Release the button to
return to playback at normal speed.
To select a track number above 10 (for MP3 discs only):
• Press the FOLDER/10+ button to skip 10 tracks
forward; press the FOLDER/10– button to skip 10
tracks back. Press or to skip back or forward
a single track at a time.
To select a desired folder (for MP3 discs only):
• To change folders, press and hold the FOLDER/10
+ button to skip to the next folder; press and hold
FOLDER/10– to skip to the previous folder
Programming Tracks
Programming tracks of disc are possible when playback
is stopped. Up to 20 tracks for CD disc and 99 tracks for
MP3 disc can be programmed to play in any order.
1) While playback is stopped, press the PROG/P-
MODE button [9] to enter program mode. The dis-
play will flash P01 and show the P icon.
2) While the display is flashing, press the button to
select a track.
3) Press the PROG./P-MODE button [9] to save the
selected track as Program Track 01. The display will
flash PO2 (indicating it is ready for Program Track
02).
4) Repeat steps 2 & 3 to store other desired tracks
until all desired tracks have been programmed.
5) Press the / button [7] to start playback from
the first programmed track.
6) Press the button [10] to stop program playback.
⚠
L
To clear the program from memory, press
the button [10] when the disc is stopped
or open the CD door.