Naxa NPB-428 Instruction Manual - page 19
www.naxa.com
Page 19
2. Load the cassette into the compartment with its
exposed magnetic tape facing down.
ѥ
L
The tape will spool from the left to right
reel. If the cassette you are loading is
wound to the beginning, the full reel should
be on the left.
ѥ
ѥ
Take up any slack in the tape before load
-
ing the cassette into the compartment.
Turn the cassette reel with your finger or a
pencil until the tape is taut.
3. Close the cassette compartment [25]. Push the
door of the compartment into the body of the
player until it is securely closed.
4. Cue the tape (optional). Press the TAPE or TAPE
key [29, 28] to the part of the tape that you want
to play.
5. Start playback. Press the TAPE key [27].
6. Adjust the volume. Turn the VOLUME dial [10] to
adjust the volume to a comfortable level.
7. To stop playback, press the TAPE key [30].
ѥ
L
Your player is equipped with Auto Stop.
When the end of the tape is reached, the
player will automatically stop the tape and
all keys will be deactivated.
Recording to Cassette Tapes
You can record from different sources to cassette tape.
Record with quality cassettes only (e.g., IEC type 1).
ѥ
ѥ
Do not use C120 cassettes or other special
-
ized cassettes with this player.
1. Choose the source of the recording you want to
make. Set the FUNCTION switch [11] to:
•
CD/MP3/USB/AUX
to record from the CD or
USB player, or from an audio source connected
to the AUX input jack [13].
•
RADIO
to record from the radio.
2.
Get the source ready. For CD/MP3/USB/AUX, cue
playback to the point that you want to record. For