Naxa NPB-428 Instruction Manual - page 21
www.naxa.com
Page 21
2.
Use a sturdy, flat object such as a small screwdriver
or file to break off the tab.
ѥ
L
The tab may have been removed already if
the cassette tape is not a new, blank tape
designed for recording. Commercial re
-
cordings and other pre-recorded tapes are
usually record protected.
When the record protection tab is missing, you will not
be able to press the TAPE key [26].
ѥ
L
If you would like to record with a cassette
tape that is missing its record protection
tab, use a small piece of adhesive tape to
cover the tab opening.
Caring for the Cassette Mechanism
Cassette care and cleaning products are available for
purchase from local and on-line retailers. The tape
head and pinch wheel/capstan assemblies need to be
cleaned after every 10 hours of use.
1
Erase head
2 Record/Play head
3 Capstan
4 Pinch roller
ѥ
L
Press the PLAY key [27] to get better access to
the heads and roller in order to clean them.
ѥ
ѥ
The erase head, record/play head and the
surface of the pinch roller are delicate
parts. Never touch these parts with hard
objects (e.g., screwdrivers, metal).
Never lubricate any part of the player un
-
der any circumstance.
Never turn off the player during playback,
or leave the player in PLAY mode while
the power is off. Doing so can damage the
pinch wheel.