Cd radio clock model nrc-175 please read this user manual completely before operating this unit and retain this booklet for future reference..
Laser safety: this unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. Caution: use of controls, adjustments or performance procedure herein may result in hazardous radiation exposure. Information this equipment has been tested and...
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. All the safety and operating instructions should be ...
15. Overloading do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 16. Object and liquid entry never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in fi...
Unravel the ac cord and connect it to a conveniently located ac outlet having 120v and 60hz only. The clock display will illuminate and "12:00" will appear in the window. Note: if the ac plug does not fit into a nonpolarized outlet, do not file, cut, or otherwise modify the wide blade. It is the use...
Location of controls 1. Play/pause/band 2. Stop/preset button 3. Standby on/off button 4. Display 5. Time-disp button 6. Repeat/prog button 7. Cd door 8. Function button 9. Open/close door release 10. Rev/tun- button 11. Fwd/tun+ button 12. Time-set button 13. Al 1-set/vol- button 14. Al 2-set/vol+ ...
Ac operation connect the ac power cord to a wall outlet with ac120v/60hz power supply. Radio operation 1. Power the unit on if in standby mode by pressing the standby on/off button(#3) the default mode is radio, if the unit was already on, and in cd mode, you will need to press the function button (...
Advanced cd operation 1. Press the fwd/tun+ button（#11）to skip to the next track. Press and hold to fast forward the current track. Release the button to resume normal playback. 2. Press the rev/tun- button（#10） to skip to the previous track. Press and hold to fast rewind the current track. Release ...
Clock/alarm setting alarm setting the alarm 1. Press the standby button (#3) to turn the unit off. 2. Press and hold the al1 (#13) or al2 button (#14) until the display begins to blink, and then release the button. 3. Press the tune +/- buttons (#11, 10) to adjust the hour. Note the pm indicator wil...
Usb charging please be noted that unit only go with usb charge while stand-by mode, not cd playing mode. 1. Press the standby button (#3) to turn the unit off. 2. Connect your mobile phone or other usb-powered device to the usb charging port (#20). 3. Your mobile phone or other device will start cha...
If you experience a problem with this unit, check the chart below before calling for service. Symptom cause solution unit will not turn on. Ac cord not connected. Check ac cord connection. Disc will not play. Cd compartment door not closed. Close cd compartment door. Disc inserted incorrectly. Reins...
Specifications are subject to change without notice. General: power source battery audio power output 120v~ac, 60hz 3v dc (for back up of the clock) radio section: frequency range (fm) frequency range (am) fm: 87.5 - 108mhz am: 520 - 1710 khz.
