Unravel the AC cord and connect it to a conveniently located AC
outlet having 120V and 60Hz only. The Clock Display will
illuminate and "12:00" will appear in the window. NOTE: If the
AC plug does not fit into a nonpolarized outlet, do not file, cut, or
otherwise modify the wide blade. It is the user's responsibility to
have an electrician replace the obsolete nonpolarized outlet.
If the AC cord is disconnected or if there is a power failure, this electronic clock is designed to
continue operating internally (without showing the time on the Clock Display) with a
two
"AAA" batteries (not included). To install the batteries, press and lift open the compartment
cover. Connect the battery to the terminals of the battery snap inside the compartment (use of an
alkaline battery is recommended) and snap the battery compartment cover back into place.
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery
compartment. A reversed battery may cause damage to the device.
3. If the device is not to be used for a long period of time, remove the battery to prevent damage
or injury from possible battery leakage.
4. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture.
(Follow battery manufacturer's directions.)