Naxa NS-439 Instruction Manual - page 12

Page 12 

Naxa Electronics

Program Operation

CD tracks can be programmed to play in the order you 

want.

In CD Disc Mode

1.  Press  /BAND  to make sure playback is stopped.

2.  Press the PROGRAM button to enter program 

mode. The LCD screen will display and flash [P01] 

and [PROG].

3.  Press SKIP/SEARCH   or SKIP/SEARCH   to select 

a track number, and then press the PROGRAM 

button to store it in memory. The LCD will display 

and flash [P02] and [PROG].

4.  Repeat the previous step until you have selected up 

to 20 tracks. Press  /FM ST. to start Program play.

⚠

L

Pressing SKIP/SEARCH   or SKIP/SEARCH 

 during Program play will display the 

programmed track number. Press  /BAND  

twice to clear the program list. The pro-

gram list will also be cleared if you open 

the CD door or if the unit is unplugged.

Radio Mode

Listening to AM or FM radio broadcasts.

Basic Operation

 • Press FUNCTION to select the tuner mode.

 • Press  /BAND to select the AM or FM band.

 • AM: Listen to AM broadcasts.

 • FM: Listen to FM broadcasts.

 • Press  /FM ST. to change between FM stereo and 

FM mono reception modes.

 • Choose FM stereo mode for stations with a 

strong signal. The FM ST indicator will light on 

the LCD display when the tuner is locked on a 

stereo broadcast.

 • Choose FM mono mode for stations with a 

weaker signal.

 • To optimize reception:

 • For FM broadcasts, extend and reposition the 

FM radio antenna located on the rear of the