Naxa NS-439 Instruction Manual - page 14
Page 14
Naxa Electronics
track, or press SKIP DOWN to return to the previ-
ous track.
⚠
L
If the pairing attempt fails, the unit will no
longer be in pairing mode. Press and hold
the /FM ST. button to return the unit to
pairing mode. If this doesn’t work, turn the
unit off and then try again.
The unit will try to reconnect automatically
with the last paired device when it is placed in
Bluetooth mode.
If the Bluetooth connection is lost due to ex-
ternal factors, or if it will not reconnect auto-
matically, you may need to pair again with the
NS-439. Clear the NS-439 from the Bluetooth
Devices list from the Bluetooth Devices list on
your source device before pairing again.
The unit can display and adjust the clock while
in Bluetooth mode. Refer to the section “SETUP
MODE” for instructions.
AUX Mode
Auxiliary (Aux) mode allows you to play and audio de-
vice (e.g., MP3, cassette player, etc.) through your NS-
439 system.
Basic Operation
1. Use a 3.5mm male line in cable (included) to con-
nect the Line-out or Headphone out jack of an
audio device to the AUX IN jack [17] of the system.
2. Press STANDBY to turn the player on.
3. Press FUNCTION repeatedly to select AUX mode.
4. Start playback on the external audio device.
• You must use the external audio device to
control playback.
• To avoid distortion, do not set the volume of
the external audio device to very high levels.
⚠
L
The clock can be adjusted in AUX mode as
well as in Standby mode. The procedure to
adjust the clock time is the same; refer to
the “Setup Mode” section to learn more.