Naxa NS-439 Instruction Manual - page 13

www.naxa.com 

Page 13

speaker. Avoid interference by keeping the 

FM radio antenna away from the speaker and 

power cables.

 • For AM broadcasts, you will have to rotate, 

reposition, or move the entire unit if reception 

is poor.  The AM antenna is built directly into 

the unit.

 • Press SKIP/SEARCH   or SKIP/SEARCH   to select 

a broadcast station.

Preset Stations

To save a radio station to preset station memory:

1.  Press PROGRAM on the unit or the remote.

2.  Press the REPEAT/M-UP or RANDOM/M–DN but-

tons to select a the preset station number for the 

current radio station.

3.  Press SKIP/SEARCH   or SKIP/SEARCH   to tune 

to a station.

4.  Press PROGRAM to confirm and save.

5.  To cycle through saved radio stations, press 

REPEAT/M-UP or RANDOM/M-DN.

Bluetooth

®

 Mode

Basic Operation

This unit can stream audio wirelessly from devices that 

can transmit stereo audio with Bluetooth® technology.

1.  Press FUNCTION to set the unit to Bluetooth

®

mode. The “BT” indicator will flash on the display.

2.  Enable Bluetooth on the source device.

3.  Set the source device to search for other Bluetooth 

devices. (Refer to the user manual of your device 

if you need help with this step.) Select the micro-

system “Naxa NS-439” when your device finds it. 

If your device prompts you for a passcode, enter 

“0000”.

4.  After a successful pairing, the “BT” indicator will 

light steady on the display. You can now stream 

music wirelessly from your source device to the 

microsystem.

5.  Some devices may allow you to control playback 

from the microsystem. Press PLAY/PAUSE to start 

playback, press SKIP UP to advance to the next