NBN Fibre to the Curb Setup Manual - page 6
Connecting to the
nbn
™
broadband access network
10
Connecting to the
nbn
™
broadband access network
11
B
C
POWER
WALL SOCKET
GATEW
AY
A
RESET
B
C
A
POWER
WALL SOCKET
GATEW
AY
RESET
No solid blue lights?
Check all cables are securely plugged into the
nbn
™
connection device and at the wall.
If they are, and lights are still not blue after 15 minutes, try connecting the
nbn
™
connection device to a different telephone wall socket. If this still doesn’t work,
contact your phone and internet provider.
Plug the
Ethernet cable
supplied with your own or your provider’s
Wi-Fi gateway
into the yellow port labelled ‘
C’ on the
nbn
™
connection device
. Plug the other
end into the correct port on your
Wi-Fi gateway
, and turn on its power.
If you’re unsure which port is correct, check the instructions supplied with
your gateway or contact your phone and internet provider.
Plug the
nbn
™
telephone cable
B
supplied with the
nbn
™
connection device
into the grey port labelled ‘
B’ and the other end into your telephone wall socket.
Wait for the Connection Light
and Broadband Light
on the top of the
device to turn solid blue (this may take up to 15 minutes) – do not unplug
the device during this time. Remember, your existing telephone, internet and
alarm services will not work during this brief connection period, and until the
installation of your
Wi-Fi gateway
is complete.
5
Connect your
other equipment
Equipment such as your computer and phone can now be connected to your
Wi-Fi gateway
with cables or Wi-Fi. Check the instructions supplied with your
gateway, or contact your provider to see whether you’ll need to set up a new
Wi-Fi network on your gateway to do this.
nbn
™
telephone cable
B
Ethernet cable
Wi-Fi gateway
3
Connect the nbn
™
connection device
4
Connect your own or
your provider’s gateway
15