Floppy disk drive installation guide version 1.1 nc200, nc400 and nc900
Ii copyright copyright © 1999, 2000 by network computing devices, inc. (ncd). The information contained in this document is subject to change without notice. Network computing devices, inc. Shall not be liable for errors contained herein or for incidental or consequential damages in connection with ...
Floppy disk drive installation iii certifications ul 1950, can/csa c22.2 no. 950, iec 950, fcc class a, en55022 (class a), en50082-1, en60950, c-tick, vcci, mpr ii (monitors only), ce, energy star compliant (both monitor and logic unit). Disclaimers the software products are provided “as is” without...
Iv safety summary terms in this document caution statements identify conditions of practices that can result in damage to the equipment or other property..
Floppy disk drive installation 1 floppy disk drive installation introduction these instructions describe how to connect your new floppy disk drive to your network computer (nc). Connection is made to the parallel port on the nc. When you are using the windd ica client, this drive provides you with p...
Floppy disk drive installation 2 floppy disk drive installation system requirements to connect the floppy drive to your nc, you must have a parallel port installed. If you do not have a parallel port installed, contact your ncd distributor or sales representative. In addition, your nc must be operat...
Connecting the drive floppy disk drive installation 3 figure 1. Connecting the floppy drive to the nc 9296-1 i o.
Floppy disk drive installation 4 floppy disk drive installation connecting the drive to the network with windows nt terminal server this section describes how to connect the floppy drive to the network via an ica connection using a windows nt 4.0 terminal server edition host. Before you can use the ...
Connecting the drive to the network with windows nt terminal server floppy disk drive installation 5 3. To disconnect a network drive, click on the disconnect network drive icon or select tools disconnect network drive . . . In the dialog box that appears, select the drive to be disconnected and cl...
Floppy disk drive installation 6 floppy disk drive installation formatting a disk the current version of windows nt server 4.0 is not designed to format network-connected floppy disks. This means that you cannot format a disk locally in the disk drive connected to your nc using the disk formatting o...
Formatting a disk floppy disk drive installation 7 figure 5. Windd ica client log on window figure 6. Windd ica client options menu log on configure disk exit.
Floppy disk drive installation 8 floppy disk drive installation figure 7. Disk formatting menu.
Local floppy manager (lfm) client for unix hosts floppy disk drive installation 9 local floppy manager (lfm) client for unix hosts the lfm client provides a graphical user interface (gui) for copying files between the local floppy drive attached to the nc via the parallel interface and a unix host s...
Floppy disk drive installation 10 floppy disk drive installation figure 8. Local floppy manager client.
Troubleshooting floppy disk drive installation 11 troubleshooting use this troubleshooting guide if you encounter problems installing or using the floppy disk drive. If . . . Then . . . You cannot read files on a disk in the drive. Check that the interconnect cable is installed correctly and complet...
Floppy disk drive installation 12 floppy disk drive installation.
Network computing devices, inc. 301 ravendale drive mountain view, ca 94043-5207 9300948 rev. A.