NCD NC200 Installation Manual - page 9
Connecting the Drive to the Network with Windows NT Terminal Server
Floppy Disk Drive Installation
5
3. To disconnect a network drive, click on the Disconnect network drive icon
or select Tools
Disconnect Network Drive . . . In the dialog box that
appears, select the drive to be disconnected and click
OK
.
4. Select a drive designation in the Drive field (see Figure 4). The letter that
appears in the block is the next available unused drive designation. You can
use this letter or select a different one by pulling down on the button in the
block or at the end of the block.
Figure 4. Connect Network Drive Dialog Box
5. Enter \\Client\A$ in the Path field. To do this: select the A drive in the Shared
Directories (double-click on Client Network, then on Client, then click on A:),
or pull down on the button at the end of the Path field and select \\Client\A$ .
6. Click on the
OK
button to make the connection.
The drive, which appears as a drive icon in the Windows Explorer window, is
ready for use. You can use the Windows Explorer to move files to or from the
floppy drive just as you would any other drive.