NCD ThinSTAR 200 Installation Manual - Basic Considerations
ThinSTAR 200 Installation Guide
3
Basic Considerations
To prevent electric shock or fire hazard, do not expose the power supply,
NCD
Thin
STAR
200 terminal, line cord, or monitor to rain or moisture.
Do not set the monitor on the terminal. The terminal is not designed to
support the weight of a monitor.
Use the terminal only in an office or business environment. Do not subject to
vibration, dust, or corrosive gases because it is not designed to be used in
such environments.
Keep the terminal in a well-ventilated area. Do not cover the terminal or
place anything against the ventilation holes. Ventilation holes are on the
cover to prevent the internal temperature from rising. Do not allow anything
to fall in the ventilation holes.
Keep the terminal away from heat sources, including direct sunshine or
heating appliances. The maximum operating temperature is 40 C (104 F).
If you are using items in the following list, install them in the order listed
before completing the instructions in this brochure.
1 Install optional memory
SIMM
s.
The
NCD
Thin
STAR
200 terminal has a
SIMM
slot for an optional 8
MB
, 16
MB
, or 32
MB EDO
(extended data out)
SIMM
. If you bought your
SIMM
from
NCD
, refer to the installation sheet included with the
SIMM
.
Otherwise, refer to the
NCD
Thin
STAR
200 System Administrator’s Guide for
the
SIMM
specifications and installation procedure.
2 Attach the stand.
If you are using the stand that comes with
NCD
Thin
STAR
200, place the
base in the one-piece stand now. Observe the orientation of the stand’s two
supports, as shown on page 2, for the placement of the holes.
3 Attach the optional mounting bracket and security device.
If you are using the optional mounting bracket and/or security device,
refer to the installation instructions that are included with the option.
Warning