NCE NCE1DBT Instruction manual - page 13
12
Bluetooth Mode
Note:
Foryoursafety,avoidtalkingonthephoneas
muchaspossiblewhiledriving.
Bluetoothisawirelesstransmissionwayfor
shortdistance.Thebuilt-inBluetoothcancon-
nectwiththemobilephoneshavingBluetooth
function.
Afterconnecting,youcancontrolyourmobile
phonethroughtheunit.
Pairing
Usethisfunctiontoestablishaconnectionbe-
tweentheunitandyourmobilephone.
1.Pressandhold
SRCbuttonuntil“PAIRING”
appearsontheLCD.
2.TurnonBluetoothfunctionofyourmobile
phone,keepphonewithin3meterstothe
unitandstarttosearchforBluetoothde-
vices.
3.After the name of the Bluetooth module
“SUN-BMA19”appearsonthepairinglistof
yourmobilephone,selectit.Atthistime,a
pairingcodeisrequired.Enterthepairing
code(“1234”bydefault)andtheBluetooth
pairing will process automatically. Some
mobilephonesmayinstructyoutoselect
connectordisconnect,pleaseselectcon-
necting.
Exit Pairing
After pair successfully, if you want to
disconnect,pressandhold
SRCbuttonuntil
“PAIROUT“appearsontheLCD.
Make a Call
After pair successfully, press
SRC button
repeatedlytoselectBTMUSICmode,press
buttontoselectfrom[DIALNUM].
To dial a number
1. Select[DIALNUM],thenpressthe
VOL
knob.
2. Pressthe
MENUbuttonrepeatedlytoselect
thefirstnumber,presstheknobtoconfirm.
3. Selectothernumbersasstep2.Ifthenum-
beriswrong,pressthe
buttontodelete.
4. Press todialout.
To use a number in call log or directory
1. Selecttheoptionsotherthan[DIALNUM].
2. Presstheknobtoshowthelogordirectory.
Rotatetheknobtoselectanumber.Ifthere
arenorecord,displayshows[NOMATCH].
3. Press todialout.
Receive
1. After
pair successfully, if there is a call
incoming, the unit switch to BT mode
automatically.
2. Press
to receive.
3. Press
tohangup.
Voice Transfer
During talking, press
button to transfer audio
from the unit to your mobile phone.
Note:
Some mobile phones will transfer audio from
the unit to themselves once the incoming call
is answered.
BT Audio
(if the mobile phone has the A2DP & AVRCP
functions)
Afterpairsuccessfully,pressMODEbutton
repeatedlytoswitchtoBTAUDIOmode.In
Bluetoothmainmenuof your mobile phone,
open the audio player and set the transmission
mode to Bluetooth. The audio will be trans-
ferred from the mobile phone to the unit. Some
mobile phones may hint that to connect with
the unit. After found the Bluetooth device name
“SUN-BMA19” on mobile phone, you should
select to connect it, and then input the pairing
code (“1234” by default). When music play-
back, touch
to play/pause, and press
/
key on the TFT or remote control to previ-
ous/next track (if the options are available).