NCE NCE1DBT Instruction manual - page 14
13
Bluetooth Mode
Auto Connect
PresstheMENUbuttontoentermainmenu,
andselect[AUTOON]or[AUTOOFF]inthe
menu.
AUTO OFF: After paired OK, if the distance
between mobile phone and the unit is over 10
metres, the connection will exit. The Bluetooth
technology will not automatically establish a
connection.
AUTO ON: After paired OK, if the distance
between mobile phone and the unit is over 10
metres, the connection will exit. The Bluetooth
technology will automatically establish a con-
nection between the unit and the registered
mobile phone when the transmission distance
is 10 metres or shorter.
Whether the automatic connection is ON or
OFF, when power is off then on again, the unit
Bluetooth will connect the mobile phone (if the
Bluetooth function turning on) which is paired
OK last time.
Note:
1.Toconnectautomaticallyasshownabove,
theunitmustconnectthemobilephonesuc-
cessfullybefore.
2.Theunitwilltrytoconnectthemobilephone
paired when on, most mobile phone will
connectautomatically,someneedconnect
manuallyduetodifferentsoftwaresetting.
Music Mode
A2DP
A2DP is short for Advanced Audio Distribution
Profile. The mobile phones supporting this
function can transmit stereo audio, whereas
the ones not supporting this function can
transmit mono audio only.
AVRCP
AVRCP is short for Audio/Video Remote
Control Profile. The mobile phones support-
ing this function can control the playback of a
Bluetooth audio player.
In the mode of the music player working, if you
want to make a phone call, disconnect A2DP,
otherwise the LCD will display “BUSY“ when
you dialing out.
General Notes for Bluetooth
1.ForN7X,N9X,PHILIPS,SonyEricssion,
SAMSUNGmobilephones,duringourtest,
afterthemobilephonesappearconnection
successful,theunitstillappearwaitingfor
pairing.Atthistimeyoumustfindtheunit’s
Bluetoothmodulename“SUN-BMA19”on
thepairinglistonyourmobilephoneand
selectconnectinginthesubmenu,thenthe
unitwillappearpairOK.Otherwise,thereis
novoicecomingoutwhencommunicating,
though the mobile phone has already
displayedpairOK.Somemobilephones,
suchasPHILIPS,whenitplaybacksA2DP,
youmustfindtheunit“SUN-BMA19”inthe
phone’smenuandreconnect(checkyour
mobile phone whether has theA2DP &
AVRCPfunctions).
2.Whenpairing,sometypesofmobilephone
hintthathowtooperate,forexample,when
youmakeaphonecallbytheunit,ifthe
mobilephonevoicedosn’tbetransferred
to the unit, no voice comes out. The
SAMSUNGmobilephonehintsthatvoice
shouldbetransferredtoBluetoothdevice.
3.Dependingonthemobilephone,ifprivate
modeisselected,whenyoumakeaphone
callbytheunit,orreceive,thevoicewould
be transferred to the mobile phone. But
sometimetheBluetoothmaybedisconnect
tillthecommunicationends,thenconnects
yourmobilephonetotheunitautomtically.
Some mobile phones maybe need pair
again.
4.For mobile phone, the Bluetooth device
namemustbeprimarysymbolsornumbers.
Otherwise, some unpredictable issues
may occur during the Bluetooth devices
connectingandmakingphonecall.
5.After paired OK, if no sound produced,
pleasecheckwhethertheBluetoothstereo
audioonthephoneswitchedON.