NcTech ISTAR User Manual - page 13
Display Settings
1 min
15 min
Backlight timeout:
Power-off after:
iSTAR User Manual /
v1.2
/
12
From the Settings menu, press the
icon to navigate to the
“Display Settings” screen.
Backlight Timeout: To change the timeout delay of the LCD
screen, touch the Time button and select the desired time.
(Options: Never, 5/10/30 seconds, 1/ 5 minutes). To confirm and
save selection, press the
icon at the top left of the screen.
Power Off: To change the timeout delay in which the unit will
power down, touch the time button and select the desired time.
The unit will power down and will require the 4 corner touch
sequence to power up again. (Options: 5, 15, or 30 minutes). To
confirm and save your selection, press the
icon at the top
left of the screen.
9. Settings: Display
9. Settings: Date and Time
General Settings
√ Tilt compensation
Calibrate Compass
√ GPS
√ Audio
9. Settings: General
From the Settings menu, press the
icon to navigate to the
“General Settings” screen.
GPS, Audio and Tilt compensation: To enable or disable the GPS,
Tilt or Audio within the camera, simply touch each option to toggle
between their settings. To use an external GPS device, the GPS
muct be enabled.
Calibrate Compass: Press this button and follow the onscreen
instructions.
Storage Settings
RAW
Image format:
Storage settings
From the main Capture Settings menu, press the
icon to
navigate to the “Storage Settings” screen. By default the output
format is set to RAW. This can be changed to PNG or JPG format.
9. Settings: Capture (cont...)
From the Settings menu, press the
icon to navigate to the
“Date & Time Settings” screen.
To update/set the date or time use the arrows to adjust the
numbers then press “update”.