NEAR 6XL Installation And Use Manual - page 6
2
Panel Description
1. Status Indicators - The Status LEDs are multi-purpose indicators, one for each channel.
Green - Amplifier is on and operating normally.
Amber - Amplifier is in low-power consumption Sleep Mode.
Red - Amplifier has protected itself due to a fault condition.
2. Signal Indicators - These illuminate green when signal is present at the output, one for each channel.
3. Limit Indicators - These indicators illuminate amber when excessive signal levels or very low imped-
ance output loads cause output distortion to exceed a few percent. Under such conditions, a built-in
Clip/Limiting circuit activates and reduces input signal levels to protect both amplifier and speaker
loads. One for each channel.
4. Power Switch/Circuit Breaker - Magnetic circuit breaker switch controls AC power to the amplifier.
5. Fan Air Intake and Grilles - Air intakes for 2 independent, variable-speed cooling fans. Each responds
as needed to keep the amplifier cool while reducing dust build-up. Removable fan grilles are provided
to allow access to the dust filters for cleaning.
6XL Front Panel