Nebula P1 Lite D2321 Owner's Manual - page 12
Power
supply: DC 19V
Power
consumption: < 57 W
Standby
power consumption: < 0.5W
Display
technology: 0.45inch 1280*800p DLP
Light
source: RGB LED
Projection
image size: 12 - 150 inch
Resolution:
1280 x 800 Pixel
Brightness:
500 ANSI Lumens
Contrast
ratio: 1000:1
Throw
ratio: 1.2
Throw
distance: 0.5m to 3m
Speaker
drivers: 10w x 2
Bluetooth
version: V4.1
Built-in
battery type: Li-Polymer
Capacity:
19500 mAh 3.8V
Operating
time: 3 hours
Remote
control batteries: CR2032 x 2
Recommended
ambient: 5°C to 35°C / 41°F to 95
°F
Relative
humidity: 15% ~ 85% (non-condensing)
Storage
temperature and humidity: < 65°C / 149
°F
,
< 90% humidity
Dimensions
(W*H*D): 122 * 138 * 178 mm / 4.8 * 5.4 * 7 in
Weight:
1,483 g / 52.3 oz
7
Troubleshooting
①
Fail to power on by the remote control?
● Make
sure that the device is connected to the power supply.
● Slide
down the lens cover.
②
Fail to power on by sliding down the lens cover?
● Make
sure that the device is connected to the power supply.
● Slide
up the lens cover and wait for 10 seconds, then try again.
③
The
remote control doesn’t work?
● Remove
the protective tab to activate the remote control batteries.
④
Blurred
image?