Nebula P1 Lite D2321 Owner's Manual - page 8
②
Slide down the lens cover. The projector will automatically power on. You can also press
on
remote control to power on.
③
Turn the device towards a suitable projection surface or wall.
④
To
focus the image, press
(or press and hold
)
and then
/
.
Fully
charge the built-in battery before using for the first time, which will prolong the battery
lifespan.
4.4
Settings
Finish
the projector settings when you power on the device for the first time.
[Image
Mode]
Adjust
brightness in 3 modes: Brightest / Standard / Battery
[Auto
Keystone
Correction]
Enable
/ disable auto keystone correction.
[Keystone
Correction] Correct keystone manually. Default value is 0.
[Language]
English
[Project
mode]
[Front
Ceiling]: The device is hanging from the ceiling in an
upside
down position. The image is rotated by 180 degrees.
[Rear
Ceiling]: The device is hanging from the ceiling in an
upside
down position behind the projection surface. The image is
rotated
by 180 degrees and horizontal mirrored.
[Front]:
The device is located in front of the projection surface.