B2c2 sky2pc pci card satellite receiver installation guide windows 98 (compatible with win 98, me, 2000, and 2003) your link to high speed internet via satellite www.Nebulink.Net.
Installing the digital receiver pci card the digital receiver card fits into an unused pci slot in your pc. As each pc is different, consult your pc manufacture’s instructions. 1) turn the pc off. 2) open the side panel of your computer to expose the pci slot. 3) choose an available pci slot. If the...
Assembly and installation of antenna 1) insert the nebulink cd in the cd-rom drive 2) click ‘start’ Æ ‘run’, type [cd-rom drive]:\satfinder\satwin.Exe (example d:\satfinder\satwin.Exe) 3) click ‘ok’. 4) click ‘file’ Æ ‘new’ Æ ‘new look angle’ 5) click ‘zip’, input your zip code, click ‘sat’ Æ ‘telst...
4.
Locating the satellite included on you nebulink cd-rom is a software package for setting up your dish to locate the satellite which our service is running. 1) to run the software, launch “satwin.Exe” from the satfinder folder on the nebulink cd. 2) click “file” Æ ”new” Æ ”new look angles” (on the me...
Getting a satellite lock now that you have your receiver card setup and you dish pointed in the correct location we now need to work on getting the signal locked in. To do this we will be using the receiver card and the dish . 1) verify you have your cable connected from the lnbf of the dish to the ...
Please contact nebulink customer support to activate your user name and password toll free at (877) 634-0101 or send an e-mail to support@nebulink.Com 7.
8.
Nebulink client appication software windows 95 / 98 / me / nt / 2000 1) place the nebulink cd in the cd-rom drive 2) click ‘start’ Æ ‘run Æ ’browse’ 3) click the down arrow, select cd-rom drive, double click nebulink client, double click desc133.Exe 4) follow the instructions 5) reboot the pc nebuli...
9) receiver cards – mac address override – type in your mac address of you receiver card. (can be found on the card) 10) click ok 2 times 11) click advanced Æ enabled Æ hide 12) restart pc 13) you have now completed the required installation for nebulink 14) go to internet browser configuration 10
Internet browser configuration internet explorer 5.0 1) right click on the internet explorer icon on the desktop 2) select porperties 3) select the connections tab 4) under dial-up settings select the isp then click on settings 5) make sure nothing is selected. Under proxy server select use proxy se...
Contact information address denney & associates s2998 county hwy s westby, wi 54667 phone toll free (877) 634-0101 office (608) 634-6350 email sales@nebulink.Com support@nebulink.Com 12.
