Nebulink B2C2 SKY2PC Installation Manual - page 9
Nebulink Client Appication Software
Windows 95 / 98 / ME / NT / 2000
1)
Place the Nebulink CD in the CD-ROM drive
2)
Click ‘Start’
Æ
‘Run
Æ
’Browse’
3)
Click the down arrow, select CD-Rom drive, double click Nebulink Client, Double
click DESC133.EXE
4)
Follow the instructions
5)
Reboot the PC
Nebulink Client Configuration
Windows 95 / 98 / ME / NT / 2000
1)
Look for a red “Capitol ‘
N
’ “ icon, in the system tray, in the lower right hand corner of
the screen. Double click it. This will display the Nebulink Login Client Monitor
2)
Click Advanced
3)
Typed in your User Name and Password. You may have to click the Enable button
above to get access to the User Name and Password. After entering your Username and
Password, Click on the Enable button again
If the Mac Address was found go to 11
If the Mac Address was not found go to 5
4)
Click Advanced
5)
Click on Options
6)
Internet Connection Type Dial-Up Networking Connection
7)
Click Advanced
8)
Service Settings Login Server = 216.145.238.162, Server Port = 7000, Acknowledge
Port = 9000
9